User's Guide
Table Of Contents
- Preface
- Legal Notice
- Safety Precautions
- Precautions
- Regulatory Information
- Table of Contents
- 1. Before Using the Printer
- 2. Paper and Print Media
- 3. Driver installation and uninstallation
- 4. Wired Network Settings (For wired network printer models)
- 5. Wireless network setup (applicable to Wi-Fi models)
- 6. Mobile Print (for models with Wi-Fi function only)
- 7. Print
- 8. Control Panel
- 9. Routine Maintenance
- 10. Troubleshooting
- 11. Product Specification
56
7.3. Manual Duplex
1. The printer driver supports manual duplex.
Note:
•If the paper is thin, it may wrinkle.
• If the paper is curled, make it flat and put it back into the manual feeder tray or automatic
feeder tray.
• If the manual duplex function causes a paper jam, see Section 10.1 for handling it.
2. Ensure that certain amount of paper is loaded into the automatic feeder tray before printing.
Note:
• For loading paper, see Section 2.2.
• For the type of media that can be printed with the automatic feeder tray, see Chapter
2.1. It is recommended to use the standard paper.
• Some paper media are not suitable for the duplex printing. Trying the duplex printing
with it may damage the printer. When Paper Type is Thick or Transparency, please do not
try Duplex Printing. If 2 x 2 Poster Print is checked in the Printing Preferences dialog box,
Manual Duplex will not be supported.
• Paper will get jammed or cannot be fed in when the automatic feeder tray is loaded with
more than 150 sheets.
3. Printing steps are as follows (for Windows system only) :
a) Open the document to be printed from the application (such as Notepad), and select Print from
the File menu