User's Guide

IV
Precautions
Precautions before Using the Printer:
1.
Read and understand all instructions;
2. Familiarize yourself with the basic principles associated with operating electrical appliances;
3. Comply with all warnings and instructions marked on the equipment or specifie in the manual supplied with the
equipment;
4. If the operating instructions conflic with the safety information, please refer back to the safety information, as
you may have misunderstood the operating instructions. If you cannot resolve the conflicts please call the
Customer Service Hotline or contact a service representative for help;
5. Before cleaning the equipment, remove the power cord from the AC power supply outlet. Do not use liquid or
aerosol cleaners;
6. Please make sure that the equipment is put on a stable desktop surface to avoid serious damage caused by the
falling of the equipment;
7. Do not put the equipment near a radiator, an air conditioner, or a ventilation pipe;
8. Do not put any articles on the power cord. Do not put the equipment at the place where its power cord could be
stepped on by people;
9. Outlets and extension cords must not be overloaded. This may reduce performance and could result in fir or
electric shock;
10. Do not allow pets to chew on the AC power cord or the computer interface cable;
11. Do not allow sharp objects piercing equipment slot, so as to avoid contact with the
high-voltage device, which otherwise may result in fir or electric shock. Take care not to spill liquids onto the
equipment;
12. Do not disassemble the equipment so as to avoid the risk of electric shock. Necessary repairs may only be
carried out by professional maintenance personnel. Opening or removing the cover could result in an electric
shock or other potential hazards. Incorrect disassembly and assembly could also result in an electric shock
during future use;
13. If any one of the following occurs, disconnect the equipment from the computer and pull out the power cord from
the AC wall socket and contact a qualifie member of the service personnel for maintenance:
• Liquid has been spilled into the equipment.
• The equipment has been exposed to rain or water.
• The equipment falls, or the cover is damaged.
• Significan changes in the equipment’s performance.
14. Only adjust the control mentioned in the instructions. Incorrect adjustment of other controls may result in damage
and mean that professional maintenance personnel need to spend more time fixin it;
15. Do not use the equipment in a thunderstorm so as to avoid the risk of an electric shock. If possible, pull out the
AC power cord during a thunderstorm;
16. If you continuously print multiple pages, the surface of the tray will become very hot. Take care not to touch this
surface, and keep children away from this surface;
17. The signal wire of the device connected with the printer can not be connected to the outdoors;
18. Please ensure timely ventilation in case of a prolonged use or printing huge amounts of documents in a poorly
ventilated room;
19. In standby status, the product will automatically enter into the power saving (sleep) mode if it does not receive
any job order for a while (such as 1 minute); and it can realize zero power consumption only if it has not been
connected with any external input power supply;
20. As the Class 1 equipment, the product must be connected to the power supply outlet with protective grounding
line when using;
21. This product should be placed according to the shipping marks on the product package box during delivery;
22. This product is a kind of low-voltage equipment. When using this product below the specifie voltage range,
please refer to the product precautions or call Pantum Aftersales Service Centre, if the toner comes off the
printed contents, or the equipment starts slowly;
23. This product is sold as a complete machine. The consumers can go to Pantum Aftersales Service Centreto
purchase parts they need. If the product sold is inconsistent with the package list, please go to the specifie
Aftersales Service Centre to solve the problem;
24. Install this product in a place with the temperature between 10°C and 32.5°C and the relative humidity between
20% and 80%;
25. For security and other reasons the printer may switch to intermittent printing after a certain amount of continuous
printing.