User Guide

ManualsBrandsZhuhai Pantum Electronics ManualsComputers & AccessoriesMonochrome Laser Multifunction Printer

Table Of Contents

Preface
Legal Notice
Safety Precautions
Precautions
Legal Information
Table of Contents
1. Before Using the Printer
- 1.1. Product series introduction
- 1.2. Supplied Accessories
- 1.3. Product View
- 1.4. Laser Toner Cartridge
- 1.5. Control Panel
  - 1.5.1. Overview of control panel
  - 1.5.2. Function of numeric keyboard
- 1.6. Function of status indicator
- 1.7. Function of power indicator
2. Paper and Print Media
- 2.1. Paper Specification
- 2.2. Special Paper
- 2.3. Non-printing Area and Non-scanning Area
- 2.4. Loading Paper
  - 2.4.1. Loading into the Automatic Feeder Tray
  - 2.4.2. Install manual feed tray
- 2.5. Paper and Manuscript Use Process
  - 2.5.1. Scanning With Tablet
  - 2.5.2. Scan with the automatic document feeder (ADF)
3. Driver installation and uninstallation
- 3.1. How to install Windows printer driver
- 3.2. macOS system driver installation
  - 3.2.1. Driver installation
- 3.3. Add printer to macOS system
4. Wired network setup (applicable to wired network models)
- 4.1. Set IP Address
  - 4.1.1. Automatic Setting
  - 4.1.2. Manual Setting
5. Wireless network setup (applicable to Wi-Fi models)
- 5.1. Basic structure mode
- 5.2. Wi-Fi Direct mode
- 5.3. Wireless network setup FAQs
6. Web server
- 6.1. Visit the embedded Web server
- 6.2. Use Web server to manage printer
7. Print
- 7.1. Print Function
- 7.2. Print Settings
- 7.3. Cancel printing
- 7.4. Printing Mode
  - 7.4.1. Printing with the Automatic Feeder Tray
  - 7.4.2. Printing with manual feed tray
- 7.5. Automatic Two-Sided Printing
  - 7.5.1. Duplex printing unit setup
  - 7.5.2. How to carry out auto duplex printing
- 7.6. Fine mode printing
- 7.7. Mute printing
- 7.8. Auto shut-off setting
- 7.9. Open Help Document
8. Copying
- 8.1. Copying function
- 8.2. Copying method
- 8.3. Copying cancel
- 8.4. Common copying setting
- 8.5. ID card copying setting
- 8.6. Receipt setting
  - 8.6.1. Intensity
  - 8.6.2. Paper setting
9. Scan
- 9.1. Pull Scan
- 9.2. macOS System Scan
  - 9.2.1. ICA Scan
  - 9.2.2. TWAIN Scan
- 9.3. Push Scan
- 9.4. Cancel Scan Job
10. Fax
- 10.1. Connect Devices
- 10.2. Fax Settings
- 10.3. Fax Functions
- 10.4. PC-Fax
  - 10.4.1.Sending Fax with PC-Fax
11. Mobile Print/Scan/Fax
- 11.1. "Pantum" APP
- 11.2. Mopria mobile print
- 11.3. NFC label
  - 11.3.1. Preliminary preparations
  - 11.3.2. How to print
- 11.4. AirPrint mobile print
12. General Settings
- 12.1. System Settings
- 12.2. Network Settings
- 12.3. Network Information
- 12.4. Print information report
- 12.5. Residual amount of toner
- 12.6. Configure the e-mail address book
- 12.7. Configure the FTP address book
- 12.8. Online upgrade
13. Routine Maintenance
- 13.1. Cleaning the Printer
- 13.2. Toner cartridge and drum component maintenance
  - 13.2.1. About toner cartridge and drum component component
  - 13.2.2. Replace toner cartridge and drum component
14. Troubleshooting
- 14.1. Cleaning Jammed Paper
- 14.2. Software Failure
- 14.3. Error Message
- 14.4. Common Troubleshooting
  - 14.4.1. Common Trouble
  - 14.4.2. Image Defects
- 14.5. Fax faults
15. Menu Structure
16. Product Specifications
- 16.1. Overview of the Specifications
- 16.2. Print Specifications
- 16.3. Copy Specifications
- 16.4. Scan Specifications
- 16.5. Fax specification (applicable to machine with a fax)

1.3. Product View

Side view

Cover of automatic

document feeder

This is used to remove the paper jammed in scanning for the

ADF.

Feed tray of automatic

document feeder

This is used to place originals scanned from the ADF.

Exit tray of automatic

document feeder

Prevent originals scanned from falling off.

Cover of scanner

Open the cover of scanner to place the scanned originals on its

glass plate.

Output Bin

For storing the printed paper.

Front USB interface

This is used to scan to an U-disk without a computer.

Control Panel

Indicate printer status to conduct set operation.

NFC (Near Field

Communication) label

Touch this label on mobile device to download or start Pantum

printer App and connect Wi-Fi Directly.

Glass Platen

This is used to place originals scanned from platen.

Output Tray

To prevent the printed paper from falling.

Front Cover

To open the front cover to take out the laser toner cartridge.

Manual feed tray

For placing mediums that are printed in manual feed tray.

Power switch

Turn the power on or off and press this button under Ready state

to enter energy-saving mode.

Press and hold this button for more than 2s to turn the printer

power off.

Automatic Feeder Tray

For placing mediums that are printed in auto feed tray.