User Guide
Table Of Contents
- Preface
- Legal Notice
- Safety Precautions
- Precautions
- Legal Information
- Table of Contents
- 1. Before Using the Printer
- 2. Paper and Print Media
- 3. Driver installation and uninstallation
- 4. Wired network setup (applicable to wired network models)
- 5. Wireless network setup (applicable to Wi-Fi models)
- 6. Web server
- 7. Print
- 8. Copying
- 9. Scan
- 10. Fax
- 11. Mobile Print/Scan/Fax
- 12. General Settings
- 12.1. System Settings
- 12.1.1. Ink saving setting
- 12.1.2. Language Setting
- 12.1.3. Restore Factory Settings
- 12.1.4. Sleep Time Setting
- 12.1.5. Mute printing
- 12.1.6. Print a Page for Clean & Fix
- 12.1.7. Auto shut-off setting
- 12.1.8. Sound/volume (applicable to machine with the fax feature)
- 12.1.9. Time/date (applicable to machine with the fax feature)
- 12.2. Network Settings
- 12.3. Network Information
- 12.4. Print information report
- 12.5. Residual amount of toner
- 12.6. Configure the e-mail address book
- 12.7. Configure the FTP address book
- 12.8. Online upgrade
- 12.1. System Settings
- 13. Routine Maintenance
- 14. Troubleshooting
- 15. Menu Structure
- 16. Product Specifications
6
1.5. Control Panel
1.5.1. Overview of control panel
The layout of the printer control panel is shown below:
Control panel without the fax feature
1
LCD Display
Display operation interface and product information.
2
Copy Button
Press this button to enter into copy mode.
3
Scan Button
Press this button to enter into scan mode.
4
ID Card Copy
Button
Press this button to enter into ID Card Copy mode.
5
Wi-Fi button
Short press Wi-Fi button to turn on direct Wi-Fi connection of the printer
and automatically print out "Mobile Device Wi-Fi Connection Wizard"
page (for models with Wi-Fi function only).
Long press Wi-Fi button for over 2s to start WPS when Wi-Fi is not
connected or to disconnect Wi-Fi when it has already been connected (for
models with Wi-Fi function only).
Open save toner function(applicable to non-Wi-Fi model only).
6
Bill Copy Button
Press this button to enter into Bill Copy mode.
7
Cancel
Execute cancel operation
Idle state interface under copy mode, to reset the "Number of Copies" to
01.
8
Start Button
This is used to start relevant operations after finishing operation settings.
In case of a feed failure, please press this key for pick-up and printing
again.
9
Menu
Open the main menu of control panel