User Guide

ManualsBrandsZhuhai Pantum Electronics ManualsComputers & AccessoriesMonochrome Laser Multifunction Printer

Table Of Contents

Preface
Legal Notice
Safety Precautions
Precautions
Legal Information
Table of Contents
1. Before Using the Printer
- 1.1. Product series introduction
- 1.2. Supplied Accessories
- 1.3. Product View
- 1.4. Laser Toner Cartridge
- 1.5. Control Panel
  - 1.5.1. Overview of control panel
  - 1.5.2. Function of numeric keyboard
- 1.6. Function of status indicator
- 1.7. Function of power indicator
2. Paper and Print Media
- 2.1. Paper Specification
- 2.2. Special Paper
- 2.3. Non-printing Area and Non-scanning Area
- 2.4. Loading Paper
  - 2.4.1. Loading into the Automatic Feeder Tray
  - 2.4.2. Install manual feed tray
- 2.5. Paper and Manuscript Use Process
  - 2.5.1. Scanning With Tablet
  - 2.5.2. Scan with the automatic document feeder (ADF)
3. Driver installation and uninstallation
- 3.1. How to install Windows printer driver
- 3.2. macOS system driver installation
  - 3.2.1. Driver installation
- 3.3. Add printer to macOS system
4. Wired network setup (applicable to wired network models)
- 4.1. Set IP Address
  - 4.1.1. Automatic Setting
  - 4.1.2. Manual Setting
5. Wireless network setup (applicable to Wi-Fi models)
- 5.1. Basic structure mode
- 5.2. Wi-Fi Direct mode
- 5.3. Wireless network setup FAQs
6. Web server
- 6.1. Visit the embedded Web server
- 6.2. Use Web server to manage printer
7. Print
- 7.1. Print Function
- 7.2. Print Settings
- 7.3. Cancel printing
- 7.4. Printing Mode
  - 7.4.1. Printing with the Automatic Feeder Tray
  - 7.4.2. Printing with manual feed tray
- 7.5. Automatic Two-Sided Printing
  - 7.5.1. Duplex printing unit setup
  - 7.5.2. How to carry out auto duplex printing
- 7.6. Fine mode printing
- 7.7. Mute printing
- 7.8. Auto shut-off setting
- 7.9. Open Help Document
8. Copying
- 8.1. Copying function
- 8.2. Copying method
- 8.3. Copying cancel
- 8.4. Common copying setting
- 8.5. ID card copying setting
- 8.6. Receipt setting
  - 8.6.1. Intensity
  - 8.6.2. Paper setting
9. Scan
- 9.1. Pull Scan
- 9.2. macOS System Scan
  - 9.2.1. ICA Scan
  - 9.2.2. TWAIN Scan
- 9.3. Push Scan
- 9.4. Cancel Scan Job
10. Fax
- 10.1. Connect Devices
- 10.2. Fax Settings
- 10.3. Fax Functions
- 10.4. PC-Fax
  - 10.4.1.Sending Fax with PC-Fax
11. Mobile Print/Scan/Fax
- 11.1. "Pantum" APP
- 11.2. Mopria mobile print
- 11.3. NFC label
  - 11.3.1. Preliminary preparations
  - 11.3.2. How to print
- 11.4. AirPrint mobile print
12. General Settings
- 12.1. System Settings
- 12.2. Network Settings
- 12.3. Network Information
- 12.4. Print information report
- 12.5. Residual amount of toner
- 12.6. Configure the e-mail address book
- 12.7. Configure the FTP address book
- 12.8. Online upgrade
13. Routine Maintenance
- 13.1. Cleaning the Printer
- 13.2. Toner cartridge and drum component maintenance
  - 13.2.1. About toner cartridge and drum component component
  - 13.2.2. Replace toner cartridge and drum component
14. Troubleshooting
- 14.1. Cleaning Jammed Paper
- 14.2. Software Failure
- 14.3. Error Message
- 14.4. Common Troubleshooting
  - 14.4.1. Common Trouble
  - 14.4.2. Image Defects
- 14.5. Fax faults
15. Menu Structure
16. Product Specifications
- 16.1. Overview of the Specifications
- 16.2. Print Specifications
- 16.3. Copy Specifications
- 16.4. Scan Specifications
- 16.5. Fax specification (applicable to machine with a fax)

Redial/Pause

This is used to redial the last number dialed before under Standby

mode or to insert a pause symbol in the fax number under Edit mode.

Bill Copy Button

Press this button to enter into Bill Copy mode.

Wi-Fi button

Short press Wi-Fi button to turn on direct Wi-Fi connection of the

printer and automatically print out "Mobile Device Wi-Fi Connection

Wizard" page (for models with Wi-Fi function only).

Long press Wi-Fi button for over 2s to start WPS when Wi-Fi is not

connected or to disconnect Wi-Fi when it has already been connected

(for models with Wi-Fi function only).

Open save toner function(applicable to non-Wi-Fi model only).

Contacts

This is used to enter quickly the Phone Book option under Fax mode.

Cancel

Execute cancel operation

Idle state interface under copy mode, to reset the "Number of Copies"

to 01.

Start Button

This is used to start relevant operations after finishing operation

settings.

In case of a feed failure, please press this key for pick-up and printing

again.

Open the main menu of control panel

Back

Return to the previous menu.

Confirm the selection on screen.

Scroll through the menus and options .

Increase 1 copy on the ready interface of Copy mode.

Down

Scroll through the menus and options .

Decrease 1 copy on the ready interface of Copy mode.

Status Light

Indicate the status of printer. (Please see Chapter 1.6).