User's Manual

3.Driver installation and uninstallation
3.1.Driver installation based on Windows system
• Before installing the drive, you need to learn about printer model by printing printer information page out and check the product
name (please refer to Chapter 9.4
for printing methods).
• In case of covering the installed driver, the installation language cannot be changed. Please uninstall the printer driver and then
install the driver of new version.
Note: • Driver installation interface may differ because of different models and functions, so the schematic diagram is only
for your reference.
3.1.1.Installation via USB connection
1. Connect the printer to computer with USB cable and then turn power on.
2. Insert the installation CD companying with the printer in the CD driver of computer and operate Autorun.exe installation program.
3. Read and agree to the licensing agreement, select installation language and printer model, select “USB Connection” and then click
“Install”.
4. The system starts to install driver, and it may take several minutes.
5. After installation is finished, “Installation Complete” interface will pop out, and it will be closed automatically in about 3s.
3.1.2.Installation via wired network connection
1. Turn the power of printer and computer on.
2. Connect the computer to wired network.