User's Manual

8. Click “Continue Installation” on the prompt window popping out.
9. The system will finish driver installation automatically.
• If USB cable is used to connect the computer and Wi-Fi model, the window to prompt wireless network setup will pop out during
driver installation process, as shown in the diagram above. Click “Yes” to set up the wireless network of printer with wireless network
setup tool (refer to Chapter 5.1.1
).
• If USB cable is not used to connect computer with Wi-Fi model or non Wi-Fi model, the prompt window of wireless network setup
will not pop out.
10. Click “Restart” and wait for computer restart to finish installation.
Note: • If the printer and computer have been connected with USB cable, the USB connection mode will be added to the
printer automatically after computer is restarted.
3.3.Add printer to Mac system
3.3.1.Add in USB connection mode
1. Connect the printer to computer with USB cable and then turn power on.
2. Enter the “System Preferences” – “Printers & Scanners” of computer.
3. Click
button to select “Add Printer or Scanner”.
4. Select printer and then select the corresponding printer mode from the “Use” menu popping out.
5. Click “Add”.