User's Manual

Before printing, please make sure mediums of corresponding quantity have been installed inside the auto feed tray, and there is no printing medium in the manual feed tray.
Note: • For precautions on loading paper, see Chapter 2.
• For the type of media to be printed with the automatic feeder tray, see Chapter2.1
.
7.4.2.Printing with manual feed tray
When you put papers in the manual feed tray, the printer will enter manual feed mode.
Note: • Manual feed mode means that papers will be fed from the manual feed tray first if there are papers being put inside it.
• Generally, the manual feeder tray is used to print on special paper, such as envelopes, transparencies, etc., and only one piece of paper can be loaded each time.
• Please refer to Chapter 2
for putting papers inside manual feed tray.
• Please refer to Chapter 2.1
for type of mediums that can be printed via manual feed tray.
7.5.Automatic Two-Sided Printing
The printer supports automatic two-sided printing of plain paper. Paper size supported by the automatic two-sided printing: A4,Letter, Legal, Oficio, Folio,16K.
Note: • Trying the automatic two-sided printing may damage the printer if some paper media are not suitable for automatic two-sided printing.
• Auto duplex printing does not support poster printing.
• Please refer to Chapter 2
for paper loading and type of mediums that can be printed via auto feed tray.
7.5.1.Duplex printing unit setup
For the purpose of achieving the best printing result, you can set up the paper size of duplex printing unit. As for duplex printing of A4 and 16K papers, the slide should be adjusted to the A4
position; as for Letter, Legal, Folio and Oficio duplex printing, the slide should be adjusted to the Letter position.
Setup steps of duplex unit are:
1. Draw out duplex unit.