User's Manual

2.Set the "Mopria print service" as "On".
All other printing plug-ins should be shut down when you use Mopria mobile printing function.
The printing steps may varied by applications, taking Adobe Reader as an example for explanation.
1. Turn on printer power.
2.Connect the Android mobile device with wireless network of the printer (Please refer to Chapter 5
for how to connect).
3. Open the files you need to print with Adobe Reader on the Android device.
4. Click
.
5.Tap "Print".
6.Please make sure the Pantum printer is selected.
If you selected other printer (or failed to select any printer), please tap the pull-down menu of printer, and select your Pantum printer.
7.Set printing parameters, e.g. print pages.
8.Tap "Print".
Note: • If printing fails, please inspect if the Android device is connected to the wireless network where the printer is
connected to.
• If the Android mobile device did not detect any printer, check whether the printer is powered on and the printer is
turned on.
8.1.3.NFC function
NFC function allows non-contact point-to-point data transmission between electronic devices. To use this function, you need to install
the Pantum printer App on a mobile phone that supports NFC, or conduct Mopria mobile printing after finishing Wi-Fi Direct
connection through NFC function.
Note: • NFC recognition may not be used normally affected by the material of phone cover.
• Touch time and distance may differ because of the mobile phones used.
8.1.3.1.Preliminary preparations
1. Printer with Wi-Fi Direct function.
2. Android 5.0 or higher version mobile devices support NFC function and Wi-Fi Direct function.
8.1.3.2.How to use NFC function to print
1. Inspect if the NFC and Wi-Fi Direct function are enabled on the mobile device and if Wi-Fi Direct function of printer is enabled.
(Please refer to Chapter 9.2
for how to enable Wi-Fi Direct function).
2. Touch the NFC identification on printer with NFC antenna of mobile device (in the backside of mobile device in general). After
several seconds, the mobile device will connect to the printer.
Note: • For some mobile devices, NFC antenna may not be on their backsides. Before touching, please check the
position of the NFC antenna of your mobile device.
• If the mobile device is not installed with Pantum App, the Pantum App download link will pop out automatically.
Try again after downloading and installing the App.
3. Touch the NFC identification on printer with NFC antenna of mobile device (in the backside of mobile device in general). After