8VHU *XLGH 3DQWXP 0 6HULHV 0RQRFKURPH /DVHU 0)3 ,W LV UHFRPPHQGHG WR FDUHIXOO\ UHDG WKLV *XLGH EHIRUH XVLQJ WKH SULQWHU
Preface Welcome to the Pantum series products! We heartily appreciate your using of Pantum series products! To protect your vital interests, please carefully read the following statements. Legal Notice Trademark Pantum and Pantum logos are registered trademarks of Zhuhai Pantum Electronics Co.,Ltd. Microsoft®, Windows®, Windows Server® and Windows Vista® are trademarks registered by Microsoft Corporation in the United States or other countries/regions.
Safety Precautions Laser Safety The laser radiation is harmful to the human body. Since laser components are completely sealed in the printer, laser radiation will not leak. To avoid laser radiation, please do not randomly disassemble the printer! The printer follows the provisions of Class 1 laser products under CFR standard. The printer has a Class III b laser diode, which has no laser radiation leakage among laser components.
Precautions Precautions before Using the Printer: 1. 2. 3. Read and understand all instructions; Familiarize yourself with the basic principles associated with operating electrical appliances; Comply with all warnings and instructions marked on the equipment or specified in the manual supplied with the equipment; 4. If the operating instructions conflict with the safety information, please refer back to the safety information, as you may have misunderstood the operating instructions.
26. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. 27. Radiation Exposure Statement: This equipment complies with Canada and FCC radiation exposure limits set forth for uncontrolled environments.
0 .
2 2 2 0 ? 2 2 D A = 2 1 2 1 = (
0 .
1. Before Using the Printer 1.1. Introduction of Models G Series Name M6600 Series Picture Basic Function Print, Copy, Scan Basic Models USB Model, NET Model, Wi-Fi Model .
1.2.
1.3.
Rear View / 9<<77 # = 1 USB Interface 2 Network Interface 3 Power Interface : Rear Cover / G 1.4.
1.5.
9 0 # # 1 1 / " / "
2. Paper and Print Media Media Type - - - - - - Media size A4, A5, A6, IS B5, ISO B5, B6, Letter, Legal, Executive, # - 9 - =; - $6 - $< - /D 07 - F - ? - D - . 0< - 1 - 0< - .
2.2.
! " # $ " # $ Paper Si e % A4 6 >7 0+E @ 6 >7 0+E @ Letter 6 >7 0+E @ 6 >7 0+E @ A4 6 >7 0+E @ 6 >7 0+E @ Letter 6 >7 0+E @ 6 >7 0+E @ A4 6 >7 0+E @ 6 >7 0+E @ Letter 6 >7 0+E @ 6 >7 0+E @ &$' ( ) & ' Print $ Scan 2-4
* ( # G @ D @ # @ & @ ; @ " H L 2-5
/ G ' ( 067 - H ! - > @ ! "6 - - ( + " - - #
1@ " L B5 LTR A4 B5 A4 LTR ID COPY / G ' L - :@ 4 / G - ( - (-
. / 0 ! 1 ' 8 = # 1 0 ! = 1 0 0 ' 1 0 ' #
3. Installation and Uninstallation of the 3.1. ri er Software indows ased ri er 3.1.1.
@ ; ' " - 8#.
:@ ' $ ' ( 1 3.1.2.2.
@ ' $ " - ' $ 8 will select the corresponding series, language and model according to the purchased printer ' ' G 8#. G 8#. 9 , > @% /5 9 8#.
3.1.2.2.1.
1@ ; " - O= O 8 ' A / :@ ' ' $ P/ ( Q P ; Q - P ' Q " - P' $ Q - ( 1 3-7
3.1.2.2.2.
= - O! O - O" O # 1@ ' $ ' 3-9
3.1.3.
:@ $ ' " - 8 $ ' $ O= O $ O= O - $ ODRO ( % O$ O ( Note: ' -
3.2.
$ O$ O- ( O - # ; " O $ O" O ; " 1 ' $ O$ O - G $ O' O- ( D 3-13
: ' $ O' O - - G 6 # " $ O& O - G 3-14
+ " 0 1 &2 % - 0 0 1 ' * : ! / # >? @ : 0 ' / : $ / : 0 * $ /
* + " 0 1 &2 % - 0 0 1 ' ' - * " 0 1 $ 1 0 /5 9 * " 0 1 8 !5.
+ " 0 1 & % 0 + #2 ' , 6 ! / > ! ? @ 6 0 $ . 6 $ 8#.
, + ' " 0 1 & % 0 + #2 .
2) Wireless Network List " - ! / ; 8 - P/ ( Q ' ' - ##'= 1@ 9 5 ##'= $ O5 ##'= 9 O ##'= ' ##'= P##'=Q % $ P ! / Q
:@ ' $ ' 5 ' ' - " - P/ ( Q 6@ $ $ " - ! / $ & ' S - G 5-4
, ! + #2 4 - When the wireless hotspot of printer is active, the user can connect to it directly by searching. The wireless hotspot is enabled by default, and the default password is 12345678 . The ##'= ! ? $ ' - ! ? $ " - ! , * - + .
-% 5 < 9 9 # < 0 ' 9 9 # < 0 0 ! B 9 9 # C < 0 = 9 9 #
6. Pantum Mo ile Print and Mo ile Scan 6.1. Introduction to Pantum Mo ile Print and Mo ile Scan 6.1.1. hat s Pantum Mo ile Print and Mo ile Scan Pantum Mobile Print and Mobile Scan is a free application, which allows users to directly print photos, documents, WebPages, scanned photos and scanned documents from the mobile terminal. It connects your mobile device with wireless printer through Wi-Fi access points.
3. Launch Mobile Print App to enter into home page. 4. Select any item from the Menu, such as “Print from Album”, select pictures you need to print, click on “Print Setting” on the top right corner. 5. Select printer, number of copies and paper size, click on “Print” on the top right corner to start printing.
6.2.2. or Apple I S e ices iPad iPhone etc 1. Turn on the printer. 2. Launch the Wi-Fi in the mobile device, connect it with the Wi-Fi hotspot of Pantum printer (for example, the Wi-Fi hotspot displays Pantum-AP-XXXXXX).
7. Click on Print on the bottom left corner, the following interface pops up: 8. Click on Select Printer to select the corresponding printer. 9. Select the number of copies. 10. Click on Print to start printing.
5 ! 6 5 ! 2 $ .
/ G $ D - P Q P# Q G 0@ $ P Q G @ $ P# Q G < E
6 $ P# Q - # < $ P$ Q - - G E $ P# Q- P# Q- $ PDRQ 2 $ P" ' " Q- - ' - DR < 2
+ # $ P# P 07 " - P= Q - 5 ! 2 $ 6 .
: $ P9 Q - # - 9 - A - 9 # 6 $ P Q- # ; G < $ P# Q - # G E $ P# Q- G < 07 07
8. Click on Search , the page displays Searching scanner , the interface is as shown below and click on O after completing searching. 9. Click on Add IP Address in the middle of the navigation bar, the following interface pops up: 10.
00 $ P# Q - 0 " - - P& Q % - P= Q - < 0 0
9 8 E 4 # E 0 # # E 0 0 # # E 0 ; #
. eneral Settings This chapter mainly introduces some general settings of the control panel s menu. .1. S stem Settings .1.1. Toner Sa e Setting Users can select Toner Save Setting to lower the cost of printing. When the Toner Save mode is On , the output color of the copy will be lighter. Default Setting is Off . 1) Press Menu button to enter the menu interface. 2) Press direction pad or to select 3. System Settings and press O button. 3) Press direction pad or to select 1.
4) Press direction pad or to select 1. Close and press O button. When symbol appears after 1. Close , it indicates that the toner save setting is off; or press direction pad or to select 2. Open and press O button. When symbol appears after 2. Open , it indicates that the toner save setting is on. 5) Press Menu button to exit the menu interface, or select the Back which is the last item of each menu, and press Menu button to exit the menu interface step by step.
.1.2. Language Setting Language Setting is used to select the language to be displayed on the control panel . The default language is Chinese. 1) Press Menu button to enter the menu interface. 2) Press direction pad or to select 3. System Settings and press O 3) Press direction pad or to select 2.Language Setting and press O button. button. Note: Product’s actual region determines the Language Setting. .1.3.
.1.4. Sleep Time Setting Set the Sleep Time Mode to lower the power consumption. Sleep Time Setting allows users to select the idle time before the device enter into Sleep Mode. The default idle time is 1 minutes. 1) Press Menu button to enter the menu interface. 2) Press direction pad or to select 3. System Settings and press O button. 3) Press direction pad or to select 4. Sleep Time Setting and press O button.
4) Press direction pad or O O0 ! O ODRO % direction pad or to select 1. IPv4 or 2. IPv6 . 5) Press direction pad or to select 2. Wireless Network Settings and press O button; Press direction pad or to select 1. WPS PIN Mode . .1.6. Networ Information Users can check the network status through Network Information. 1) Press Menu button to enter the menu interface. 2) Press direction pad or to select 3. System Settings and press O button.
4) Press direction pad or to select 1. TCP/IP , 2. Wi-Fi Information . 5) Select 1. TCP/IP option and press O button, press direction pad or to select 1. IP Address , 2. Subnet mask and 3. Gateway . 6) Select 2. Wi-Fi Information option and press O button, press direction pad or to select 1. MAC Address , 2. Wi-Fi Status , 3. Wi-Fi Channel or 4. SSID Information (The display of SSID Information only supports English letters and numbers).
; 2 2 0 ? 2 D A = 1 2 1 = (
; ; 2- I O# O O= O U O O # G 2- .
Note: I ( / 0 I A ( ? - $ 2 .2.
.3.
@ # $ O O @ # O9 = (O O.
d) Click Print .
@ I O$ O - ( 9 = ( H .4. Cancel Print o O$ O H - H .5.
1 " - O O : # 0@ ? 8#. 9 G 8#.
1@ ? ! ? 9 G ! ? - OD / O " - ##'= 8-9
# ##'= 6 D - O= O U O O 8-10
" - - O O 8-11
< + $ + 0 $ + .
. Cop .1. Plain Cop 1. Put the manuscript face down into the glass platen. Note: During copying, please do not open the cover to avoid any adverse impact on the image quality. For the information on Steps of Using Paper and Manuscript , please refer to Chapter 2.5. 2. Press Copy button on the control panel,press O to enter the copy mode. Note: The printer will enter copy mode automatically when restart or startup. 3. Press direction pad or to select 1. Resolution , 2. Color Intensity , 3.
.2. Bill Cop Press this button to enter Bill Copy mode,which is used to output high-sharpness bill copy. Steps of Bill Cop 1. Press Bill Copy button to enter the Bill Copy mode, and then the area on the main LCD interface to display image quality will change to display Bill ; 2. Put the bill on the scanning platform and press Start button, then the LCD will prompt Copying... ; 3. The bill will be printed out after completing the scan. .3. I Card Cop Press ID Card Copy button to enter ID Card Copy mode.
Steps of I Card Cop 1. Press ID Card Copy button to enter the ID Card Copy mode. The printer of this model supports four types of ID Card copy, namely full page top to bottom, half page top to bottom, half page left to right, A5 long side, examples are as follows: (1) (2) (3) (4) 2. Put the ID Card on the left half of the scanning platform. The orange part is the placed area of ID Print Type 1, while ID Print Type 2, 3, 4 are in the blue part.
side of the ID Card is copied to one side of the paper. .4. Cancel Cop peration If you want to cancel the copy operation, please press Cancel button. The LCD Screen will prompt Canceling.... .
= 07 # 07 0 # 07 0 0 # # 07 0 9 #
10. Scan This printer provides two types of scan: Push Scan , which means scanning through the printer’s Control Panel operations; Pull Scan which means scanning through PC terminal scanning the application. 10.1. Push Scan This section introduces how to scan documents to the PC (only through USB cable @ G 1) Put the document face down on the glass platen.
10.1.2. Merge Scan When you want to merge multi-page scanned documents into one PDF, please use Merge Scan function. Note: The Merge Scan allow the document to be scanned into the PDF format by default. This printer can perform Merge Scan operation only on the control panel. G 1. Press Scan button to enter scan status. The default scan mode of control panel is Single Page. 2. Press or button to select and enter Merge Scan mode. 3.
10.1.3. ther Scan unctions 1. Scan to E-mail Users can scan monochrome or color documents as attachments to E-mail application. Operation steps as follows: ʗ Type the IP address in the Web browser s address bar to access the embedded Web server of the printer. SMTP to set the relative parameters of the SMTP Protocol; After ʘ Click on Setting - O" O ʙ Click on E-mail Address Book in the left setting column to enter into the settings interface of the email.
ʚ Click on New and the following window will pops up, edit the name of contacts ,input the E-mail address and then click on Submit . ʛ Put the document on the platen. ʜ Press Scan button on the control panel, and press or to select 1. Single Page Scan or 2. Merge Scan , then press O button. ʝ In the 1. Scan To interface, press O button. ʞ Press or to select Scan to E-mail and press O button.
1) Operation Steps: ʗ Type the IP address in the Web browser s address bar to access the embedded Web server of the printer. ʘ Click on Setting FTP to enter into FTP Setting interface. ʙ Click New , the following window will pop up. Set the relative parameters of the FTP Protocol. After complete setting, click on Submit .
ʚ Put the document on the platen. ʛ Press Scan button on the control panel, press or to select 1. Single Page Scan or 2. Merge Scan and press O button. ʜ In the 1. Scan To interface, press O button. ʝ Press or to select Scan to FTP and press O ʞ Press or to select the server and press O scan. button. button; Press Start button to start Note: The relative parameters setting of the FTP Protocol are as follows: FTP Transfer Protocol: FTP Server: IP Address of the server (such as 10.10.145.
10.2. Pull Scan 10.2.1. Pantum Scan Application Operation Steps: 1) Double click on Pantum Scan Application on the computer, the icon is shown as below: 2) The prompt window is shown as below: 3) Set Scan in the right list. Click Scan on the bottom right corner and start scan. This product complies with the TWAIN and Windows Image Application (WIA) standard.
10.2.2. T AIN Scan ri er = 6 0 &+ >? ' Operation Steps: 1) eyboard shortcuts: Alt I P S to open the application’s window. 2) Click on Device option and select TWAIN Scan, click the Custom Insert button below. 3) After the window pops up, set the scan information in the right list of Basic Setting and Advanced Setting . Click on Scan and start scan.
Note: Click on the Port below to select the scan port, which is shown as below: 10.2.2.2. Photoshop Operation Steps: 1) Launch Photoshop, click on File is shown below: Import on the top left corner, select TWAIN Scan, as @ " - # 1 07 0 steps.
10.2.3. IA Scan ri er = ! + $ = &+ 0 @ A + 0 / ==!' 0 D # >! 5( @ Operation Steps: 1) eyboard shortcuts: Alt I P S to open the application’s window. 2) Click on Device and select WIA Scan,click the Custom Insert below. 3) The prompt window as is shown below, set the scan information.
4) Click on Adjust the Scanned Image uality on the bottom left corner of the above picture, - % " settings, click on the O button, then Scan button to start scan. 2.Photoshop Operation Steps: 1) Launch Photoshop, click File - Import on the top left conrner and select WIA Scan, as is shown below: @ " - # 1 # : 07 1 0 operation steps.
= ! + $ = &+ 0 3 A + 0 / ==; / ' Operation Steps: 1) Click on Start - All Programs - Device and Printer on the left bottom of the desktop. 2) After the window pops up, select the needed printer, and right-click to select Set as default printer .
3) Click on Start Scan in the above option bar. 4) After the window pops up, set the scan and click Scan on the bottom right corner and start scan. 10.2.4. Cancel Scan o During the scanning, two ways are available to cancel the job: 1) Press Cancel button on the control panel to cancel the job. 2) Click Cancel button on the scan progress bar interface of the computer to cancel the job.
10.3. Mac S stem Scan 10.3.1. ICA Scan = ! 6 $ / B B Operation Steps: 1. After installing the printer driver, click System Preferences icon on the bottom left corner of the computer desktop. 2. After the window pops up, click on Print and Scan . 3. After the window pops up, click on Scan .
4. Click on Open Scanner and the scan window will pop up. 5. Click on Show Details on the bottom right corner to set the scan parameters. 6. Click on Scan on the bottom right corner and start scan.
10.3.1.2. Call CIA through applications Operation Steps: 1) Click on Finder icon on the bottom left corner of the computer desktop, or use keyboard shortcuts command shift C to open the window. Find Image Capture in Applications (or conduct keyboard shortcuts command shift A to directly switch to Applications ) and click to launch the application. 2) After selecting the printer in the left list, set the scan parameters in the right list. Click on Scan on the bottom right corner and start scan.
10.3.2. T AIN Scan Take Photoshop as an example. Operation Steps: 1) Launch Photoshop, click on File as is shown below: Import on the top left corner and select TWAIN Scan, @ " - # 1 07 0 steps.
) - 00 & 9 00 0 $ 00 9 ; $ 6 00 0 8 9 ; $
11. outine Maintenance 11.1. Cleaning the Printer Note: Please use mild detergents. Please clean the printer in accordance with the following steps: 1. Turn off the main power switch and unplug the power cord and USB cable. M6600 Series 2. Use a soft cloth to wipe the outside of the printer and remove the dust . M6600 Series 3. Raise the cover and gently wipe the platen glass with a soft cloth.
4. Raise the scanning platform until it is locked. M6600 Series 5. Open the output bin by the upper right ridge of the concave section. M6600 Series 6. Remove the laser toner cartridge along the guides.
arning Some parts of the printer are still hot within a short time after use. When opening the front cover or rear cover to clean the parts inside the printer, please do not touch the parts in the shaded area as shown in the following picture, so as to avoid burns. Note: When removing the laser toner cartridge, put the cartridge in a protective bag or wrap it with thick paper to avoid direct light damaging the photosensitive drum. 7.
11.2. Maintenance of Laser Toner Cartridge 11.2.1. Use and Maintenance of Laser Toner Cartridge For better print quality, please use the original Pantum laser toner cartridge. Note: when using the laser toner cartridge, please pay attention to the following: 8 - - the package. = L D - resulting damage is not included in the printer warranty.
Replacement steps are as follows: 1. Turn off the printer and raise the scanning platform until it is locked. M6600 Series 2. Open the output bin by the upper right ridge of the concave section.
4. Open the package of a new laser toner cartridge, hold the handle of the cartridge and gently shake around 5 to 6 times, so as to make the toner evenly distributed inside the cartridge. 5. Remove the cartridge protector (blister cover), insert the cartridge along the guides into the - O O that the cartridge is fully inserted.
- 0 0 0 $ F 0 5 9 6 0 1 $
12. Trou leshooting Please read this section carefully. It can help you solve common malfunctions in the printing process. If the problems appeared cannot be solved, please timely contact Pantum Aftersales Service Center.
H H ;$= 0@ & M6600 Series 2) Open the output bin by the upper right ridge of the concave section.
1@ & M6600 Series :@ 4 H M6600 Series 6@ " H - O O M6600 Series 12-4
6) Neatly put the paper in the tray , and do not carry out the next print until the indicator light resumes print-ready status. E@ ' H - " L & $ " L # $ for repair. 12.2. rror Message rror message Cause Measure Close Output Bin The paper bin is not fully closed. Close Output Bin.
! %% - ! %% - - - - - # 0 1 ' = # 0 1 ' = ? $ # $ ' " $ $
A F ' - $
! % .
. .
$ $ " % '
- - - ! 01 9 # 01 0 $ # 01 # # : 01 1 # #
! - - - / G = ( ! G 9 - - - ? 9 # 9 9
? 9 # 9 9 ? 9 ? 9 # ( 9 0 $ W N 6 $ 1 1N1 : :N: D 0 ":W ; 1 .
? 9 # 9 9 ? 9 ? 9 # ( 9 0 9 H W 0 ; " H 0 ":W ; # 1 .
! ! % 9 - - - ? 9 # 9 9 ? 9 ? 9 # ( 9 0 # 0 $ W # D 0 $ W 5 1 ' ; # : ? 6 & < # E 繁體中文 2 日本語 1 # # 1 & ? # 0 I / W 0 0 W 6 : # 1 06 # : 17 6 <7 0 " W 0 ! / 6 / 0 ' : 9 0 $
? # 9 9 9 0 $ )' < / ' ! ? ' ? 9 ? 9 0 ' " 777 777 777 777 # 9 777 777 777 777 1 4 777 777 777 777 0 9"$ " (( (( (( (( (( (( ! ? # $ ) / ! ? # 1 ! ? $ (()/ ! ? # : ##'= ' = $ " = ) / ! ? # # ( 9 01 <
! * % ) 9 - - - ? 9 # 9 9 ? 9 ? 9 # ( 9 ? 9 # ( 9 0 = ' 1 9 # : 9 # 6 / # : ' < / # & E 5 " 2 4 5 + ? " 07 ! ? A 00 ! ? $ ! , 3 % 9
- * 0: # 0: 0
14.
Print Speed 22ppm (A4)/23ppm (Letter) Print Time of First Page <7.
