User's Manual

Default RGB Backlight
① FN+ESC = Exit the lighting effects
② FN+Enter = Change the Backlight color.
③ FN+Backspace=Turn lights on/off [Entering Power Save
Mode when OFF]
④ FN+ | \= Change the light effects.
⑤ FN+ ↑ / ↓ = Increase / decrease light brightness .
⑥ FN+ ← / → = Decrease / Increase light speed.
⑦ FN+Tab= Adjust the sleep time of lights. Flashes once for
entering sleep mode after 2 mins and twice for 30 mins.
⑧ Cannot assign light effect in CAPS Key. Color adjusting only
by clicking FN+Caps.
Default FN Key Combinations
FN+1/2/3= Switch Bluetooth devices
Fn+5= Switch to wired mode
FN+ Home = End FN+I=Insert FN+ ? = Calculator
FN+10 = Mute FN+ += Volume UP FN+ - =Volume Down
FN+L= Browser FN+ Right Shift= My computer
FN+Win= Lock / Unlock the WIN key FN+P=Print
Fn+~ = Switch to customized lighting[FN + Ees to exit]
ESC + Left CTRL + F12 + Right Arrow = Resume the Keyboard to factory
setting
How to Operate the Screen
FN+Delete= Enter/Exit the custom screen interface
FN+Right Ctrl= open/close screen
FN+PgUp= Change the font color
FN+PgDn= Change the background color
MAC Mode
① Press FN+M for 2 seconds, White Light of CAPS flashes
Once / Twice to Exit / Enter Mac Mode. Left top corner of the
Screen displays the current mode.
② Position Changes
-Left Alt exchanges with WIN.
-Right ALT becomes WIN
-Right CTRL becomes ALT
③ Short press FN+F to Switch multimedia / standard key in F
zone.
Triple Connecting Modes
Light will fast flash when pairing devices
① Bluetooth Mode
Press FN+1/2/3 for 3 seconds and then select the BT 5.0KB [Win7
is BT 3.0KB] to pair the devices.Shortly press FN+1/2/3 to switch
devices.
② Shortly press FN+4 to enter 2.4G wireless mode
Note: Please make keyboard close to 2.4G receiver for the first
use.
③ Shortly press FN+5 to enter wired mode
Note: Automatically turned into wired mode when plug in
the cable. Dongle FCC ID:2A9BL-TK65D