User's Manual

USER MANUAL

5.1.3 Motion

This menu allows you to configure motion parameters. When motion has been detected

by one or more cameras, your WIRELESS NVR will alert you to a potential threat at your home. It

does this by sending you an email alert with an attached image from the camera to use as a

reference (if this option is enabled) and/or sending push notifications via the mobile app.

Setup

: Click icon into the setup page.

Switch

: Enable or disable motion detection.

Sensitivity

: Set the sensitivity level. Level 1 the lowest

sensitivity level while level 8 is the highest sensitivity level.

5.1.4 Alarm

Click

Alarm

button to configure the motion detection alarm function:

Motion Detection Area:

The whole screen is marked for motion

detection (red blocks) as default. If you

want to disable the motion detection on a

certain area, click the grid cursor and

then drag the mouse to highlight the

scope to unmark the area into

transparent blocks. After setting is

completed, click the right button of your

mouse to return and click Save to make

the area setup effective.