User's Manual

USER MANUAL

5.2.2 Record Schedule

This menu allows you to specify when the WIRELESS NVR records video and define the

recording mode for each channel. The recording schedule lets you set up a schedule like, daily

and hourly by normal (continuous) recording, motion recording. To set the recording mode, click

first on the mode radio button (Normal, Motion), then drag the cursor to mark the slots. The

recording schedule is valid only for one channel. If you want to use the same recording schedule

for other channels, use Copy To function.

Channel: Select the channel to set its recording parameters.

Normal: When the time slot is marked green, this indicates the channel performs normal recording

for that time slot.

Motion: When the time slot is marked yellow, this indicates the channel records only when a

motion is detected during that time slot.

NOTE: To use the motion detection, you must enable and configure the motion settings for the

channel in Alarm menu. Please see 5.6.1 Motion

No Record: A time slot marked black means that there is no recording scheduled for the time slot.