User's Manual

USER MANUAL
28
5.3 Alarm
In these section, you can configure the alarm parameters.
5.3.1 Motion
Operation is same as 5.1.3 Motion
5.3.2 Exception
This menu allows you to set the type of events that you want the WIRELESS NVR to inform you.
Event Type
: Select the event type from below options:
-
No Space on Disk
: When an HDD is full.
-
Disk Error
: If the HDD is not detected properly.
-
Video Loss
: If a camera is not connected properly.
Switch
: Check the box to enable the monitoring of the event.
Buzzer
: Set the buzzer duration when the event occurs (Off/10s/20s/40s/60s). To disable buzzer,
select
OFF.
Show Message
: Check the box to display a message on the screen when No Space on Disk, Disk
Error, or Video Loss event happens.
Send Email
: Let the WIRELESS NVR to send you an auto-email when an event occurs.