User's Manual

USER MANUAL
36
5. 5 Device
In this section, you can configure the internal HDD function.
5. 5.1 Disk
This menu allows you to check & configure the internal HDD(s). You need to format the HDD only
at the first startup and if you replace a new HDD.
Format HDD
: Select the HDD you want to format and then click
Format HDD
. To start formatting,
you need to enter your user name and password and then click
OK
to confirm to continue
formatting.
Overwrite
: Use this option to overwrite the old recordings on the HDD when the HDD is full. For
example, if you choose the option 7 days then only the last 7 days recordings are kept on the HDD.
To prevent overwriting any old recordings, select
OFF
. If you have disabled this function, please
check the HDD status regularly, to make sure the HDD is not full. Recording will be stopped if HDD
is full.