User's Manual

USER MANUAL
49
5.6.4.3 Upgrade
1. Copy the firmware file (.sw file) to your USB drive, and insert the USB flash drive into the
WIRELESS NVR’s USB port.
2. Click Select File button to choose the firmware file in your USB flash drive, then Click
OK
.
3. Click
Upgrade
button to start system upgrade. The system upgrade will last around 5-10
minutes, please do NOT power off the WIRELESS NVR or remove the USB from WIRELESS
NVR during firmware upgrade.
5.6.4.4 Parameter Management
You can export the main menu settings you have configured to a USB flash drive, or import an
exported setting file from USB flash drive to the
WIRELESS
NVR.
Save Settings
: Click to save the WIRELESS NVR current system settings to the USB device. You
will be required to input the Admin password to authenticate.
Load Settings
: Once you have created a system settings export, you can import the settings on
another NVR. Click
Load Settings
button to
navigate to the system settings file you want to
import from your USB flash driver.
You will be required to input the Admin password to
authenticate.