User's Manual

i. Introduction

The iAdapterL-2_FU adaptor is used in conjunctions with “UT2000IV operation order

expert system” or “JOYO-J centralized control system” , which can be communicated with

the host computer via USB and serial ports, the iAdapterL-2_FU adaptor doesn’t require

any configuration in communication via USB and serial port, but the Zigbee module needs

to be configured under the UT-NET communication mode.

The iAdapterL-2_FU adaptor is provided with two sockets for smart key, both

sockets can function as a charger, but only the right socket can be used for

communication.

Note: USB interface will be unavailable about this product.

ii. Appearance

Front: