User's Manual

Chapter 4 Instructions

4.1. Charge

After the WJBS-7E_2HC Transmission Adaptor is connected to the power supply, a Smart Key can be placed in a

holder of a slave machine for automatic charging. The charging progress can be seen from the display of the Smart

Key.

4.2. Data Transmission

The WJBS-7E_2HC Transmission Adaptor is connected to the upper computer through RS232, USB, or Ethernet,

and transfers the data of the upper computer to the Smart Key through the infrared interface at the bottom of the

slave machine.

4.3. GUI Display and Operations

(Standby Interface)

After the WJBS-7E_2HC Transmission Adaptor is powered on or enters the idle status, the standby interface is

displayed, to enter the main menu interface, press all the four buttons simultaneously in standby status.

4.3.1 View the software version:

After the adapter is powered on and enters normal operation mode, select "Help"→"Version", as shown below: