Document No.: UM- Wireless Router-001 Version No.: V1.0 UT-NET WIRELESS ROUTER USER MANUAL Total 14 Pages Formulated by: Yang Xing Audited by: Ren Chong Reviewed by: Approved by: Zhuhai Unitech Power Technology Co., Ltd.
Modification Records Date Version Modification June 9,2009 V1.
Copyright Statement The copyright of User Manual for UT-NET Wireless Router Product shall be owned by Zhuhai Unitech Power Technology Co., Ltd. Any part of the manual shall not be copied or spread in any form, by any approach (electronic or mechanical, including photocopying or recording), for any purpose, without written approval from the above company. (C) Copyright 2005 Zhuhai Unitech Power Technology Co., Ltd.
Guide for Readers Target: The manual describes the operating instructions for the wireless router developed by Zhuhai Unitech Power Technology Co., Ltd., enables users to make a basic understanding on the product’s functions, performances and features, to know the product's use and maintenance methods well. The manual aims to help with debugging personal and other related personal to correctly use the router, including router’s installation, commissioning, maintenance, etc .
Foreword The UT-NET wireless router is one of important products in JOYO system, which wireless signal is capable of covering target substations, thus achieving the wireless operations on locks of smart key, as well as the true on-line real-time “five-protection”.
Contents Chapter I General .....................................................................8 1.1. Brief .......................................................................................... 8 1.2. Scope of Applications ............................................................... 8 1.3. Functions and Features ............................................................. 8 1.4. Model and Configuration ......................................................... 8 Chapter II Installation.............
4.2Routine Maintenance .................................................................. 12 4.3Troubleshooting .......................................................................... 12 5.1 Warning .....................................................................................
Chapter I General 1.1. Brief The UT-NET wireless router is a wireless transceiver, which can be applicable to harsh industrial environments, and adapts to working temperature between -40 ℃ and 85 ℃. The wireless router features data routing, data transfer, signal coverage and so on, its self-organizing and self-healing capacity ensures network normal and stable. 1.2.
UT-NET wireless router , WXLYQ-2_FB UT-NET wireless router, WXXTQ-1_FB Chapter II Installation 2.1 Installation Steps Install WXLYQ-1_FB UT-NETwireless router 1. Select the installation site. The installation site of wireless router is based on the actual distribution network test results. Please see details in Instructions for Debugging of UT-NET Wireless Network . 2. Install the power. Each router is equipped with two cable terminals in parallel in the internal.
with the serial port and network controller, IV host and other equipments, therefore, in addition to compliance with the principle of distribution network, it is necessary to consider the installation of communication cables. It supports two serial communication modes: RS-232 and 422, please select the proper communication mode as needed.See Figure 2 2. Install the power. -see the above instructions for WXLYQ-1_FB UT-NETwireless router. 422 232 Figure2 3. Install the antenna.
3. Install the antenna. The same The same as the WXLYQ-1_FB UT-NETwireless router in 2.1.3. 2.2 Cautions in Installation 1. Pay attention to whether the antenna is solidly fixed, and fix it solidly if it’s loose. 2. Please do place the waterproof ring while installing the router or coordinator. Figure 4 waterproof ring 3. While installing the cover of router, please do not install it in reverse position, thus avoiding any incursion of water. Chapter III Operation 3.1Display Panel 3.
Chapter V Display Chapter VI Maintenance 4.1Update Maintenance 4.2Routine Maintenance It is available to make a diagnostic test on the installed wireless network by "UT-NET network PC-terminal program" if need to check if whether the router runs normally. This tool is used to debug the wireless network. the network topology is as shown below. Figure 5 4.3Troubleshooting 1. The router’s cover is easy to produce static electricity.
2. The inversely-installed router cover and loosened screws may cause incursion of water. The router cover is directional, please follow the cover ’s right direction to install. 3. Incursion of water; Ensure that the router’s cover isn’t inverse , check whether sealing ring exists and is correctly installed. 4. Router can’t be load network and distribute signal successfully.
regulations and per antenna type.Professional installation is required of equipment with connectors to ensure compliance with health and safety issues Install and use the device must according to the regulations: 1. 2. 3. 4. This device will not be sold to the general public; it will be sold to the electric power system only. This device requires controlled installation location by professional installers. This device requires professional configuration for use.
