User's Manual

c. There are 4 switches on the right bottom of the top case of the transmitter, respectively
for aileron, elevator, throttle and rudder reverse switches.
d. In the left corner, there is a trainer switch, when the 2 transmitters connected by a trainer
core with the trainer jack at the back of the transmitter; stir the trainer switch can make
the two transmitters have the trainer function.
e. As the diagram 2 shown, it the back sight diagrams of the transmitter, the charger jack on
the left side.
f. Diagram is showing the receiver, there are a code knob and a LED. First time to use this
radio, should be turn on the transmitter firstly, and then connect the receiver battery, and
press the code knob on the receiver for 5 seconds, then the LED of receiver be on.
Notes: while coding the transmitter and receiver, do not allow any other transmitter in the
same series to operate within the range of receiver.