Operation Manual
6
Turn the radiator in upright position after the Castor Wheel Assembly fitted.
OPERATION
CAUTION:
Only operate the radiator in normal upright position with Castor Wheel
Assemblies attached to the bottom of the unit, any other position could create a
hazardous situation
1
Insertthepluginthewalloutlet.
2
Use the power switch and press the
-button to switch the heater on.
The heater starts operating at maximum power. The display shows
. The heater will
continue operating at full power until the power is switched off manually or if the
roomtemperatureexceeds30ºC.
3
Press the
-button to turn the heater into low power mode. The displays shows .
The heater will continue operating in low power mode until the power is switched
offmanuallyoriftheroomtemperatureexceeds30ºC.
4
Press the
-button once again to switch the heater off.
TEMPERATURE SETTING
1
Press the Mode button until the temperature icon
blinks. The set temperature is
displayed and can be changed as the temperature icon
is blinking.
POWER
4
6
man_EOR 1515 LCD.indd 6 15-01-13 11:02