Operation Manual

AUTO ON
Make sure to set the desired temperature prior to setting the timer, so that
theheaterwillshutoffatthedesiredtemperaturesetting.Ifthedesired
temperature is set, this function will overrule the timer function.
With the Auto ON timer setting you can decide the time that the heater should
automatically switch on.
1
Keep pressing the ModebuttonuntilthetimericonandtheAutoONiconappear.
2
Use the + and - buttons to set the heater start time between 1 and 24 hours (default
is 1 hour).
3
The heater will automatically turn on when the set time expires.
G
NOTE!
When both desired temperature and timer on function have been activated, the
heater will switch on and off per the set temperature setting once the heater
begins to operate.
IntheAuto-onfunctiontheheaterwillturnonafterthesettimehaselapsed.
IfnoAuto-offtimehasbeenselected,adefaulttimerof10hourswillbeapplied
to the function.
FAHRENHEIT/CELSIUS FUNCTION
This heater offers the option to read the temperature setting in either Fahrenheit or
Celsius. Press F/C button to toggle between Fahrenheit and Celsius.
MAINTENANCE AND STORAGE
Allow the product to completely cool before handling or cleaning it.
Ensure the product is in the “O” OFF position and the Power Cord is unplugged from the
electrical outlet before cleaning the product.
• Alwaysensuretheproduct’shousingisintactandcompletelyassembledbefore
each use.
• Donottouchhotsurfaces.Alwaysusethehandleoftheproduct.Useprotective
mittsorglovestoavoidseriousburnsorotherpersonalinjury.
• Cleantheexteriorsurfaceoftheproductbywipingitwithasoft,dampcloth.
CAUTION:
Do not allow water or other liquids to run into the interior of the product, as
this could create a fire and/or electrical hazard.
• Donotuseanyabrasivecleanersorsolvents,asproductdamagewilloccur.
• Storetheproductinaclean,dryplacewhenitisnotinuse.
4
8
man_EOR 1515 LCD.indd 8 15-01-13 11:02