01 02 03 04 01 02 03 04 目录 /Content NEO S 简介 P1 性能参数 P2 连接与安装 P7 NEO S 硬件介绍 硬件端口介绍 NEO S 系统介绍 P5 初始化设置 P14 音乐播放器 P23 文件管理器 智能手机 APP 控制 P20 P26 OTA 系统升级 P27 NEO S Introduction P31 Specification P32 Connection and Installation P37 NEO S Hardware Introduction Hardware Introduction NEO S System Introduction P35 Boot and Initial Setup Wizard P45 Music Player P54 File Manager Smart Control OTA Update P51 P57 P57
NEO S 简介 NEO S 将简单与性能结合进行设计,将为我们解决传统发烧音视频设备复杂的 搭配和连接的麻烦,整机集成了 4K UHD 媒体播放器,音乐流媒体播放器,音视频 媒体中心,高保真耳放,高保真音乐解码器 , 高保真蓝牙解码器等功能,提供高质量 音频与视频一体的解决方案,是一款综合性能强悍且易用的发烧音响器材。 作为 4KUHD 媒体播放器,可以支持目前更先进的 4K 60Hz 12Bit HDR10+/ Dolby vision 格式的解码与输出。 高清音频播放器,支持播放来自多种数字源的音乐,例如:NEO S 内置 SSD 硬盘, 或 USB 外接的移动硬盘,局域网络连接的电脑、NAS 服务器等本地文件,强大的音 乐数播不仅支持市面上几乎所有超高采样母带音乐文件播放,例如:MQA、SACD ISO、DFF、DSF、DXD、FLAC、WAV、APE 等格式,还可以帮我们智能的管理这些 本地音乐资源。 音乐网播功能,支持在线流媒体应用以及 Air Play、Spotify、DLNA 等网络流媒 体串流方式推送的内容播放,并以出色的音质解析与回放。 NEO S 音频解码器,采用两
K UHD Hi-end 媒体播放器 机身材质 显示屏 性能参数 铝合金 5 英寸 OLED 高清触控屏 CPU 型号 Realtek RTD1619DR ARM Cortex-A55( 六核 ) 内部存储 2GB DDR4 内存 +16GB eMMC 闪存 音频 DAC ES9068*2 GPU 内置 SSD ARM Mali-G51 MP3 256G SSD 硬盘 WiFi 网络 2.4G+5G 双频 WiFi, 802.11 a/b/g/n/ac;2T2R MIMO 867Mbps HDMI 输出 2.
性能参数 XLR( 平衡 ) 输出 输出电平 (Vrms): 4.1 Vrms 总谐波失真 (THD+N):-110dB(0.00031%) 底燥 (Noise) :2uVrms 信燥比 (SNR) :118dB(20Hz-20kHz) 频率响应 (frequency response) :±0.25dB(20Hz-20kHz) 通道分离度 (CROSSTALK): -120dB(1kHz,Fs=44.1kHz) 动态范围 (DNR) :116dB RCA 输出 模拟音频特性 输出电平 (Vrms) :2.16Vrms 总谐波失真 (THD+N) :-109dB(0.00035%) 底燥 (Noise) :2.5uVrms 信燥比 (SNR) :115dB(20Hz-20kHz) 频率响应 (frequency response) :±0.258dB(20Hz-20kHz) 通道分离度 (CROSSTALK): -130dB(1kHz,Fs=44.1kHz) 动态范围 (DNR):114dB 耳机 4.4mm 单端输出 低增益模式 输出电平 (Vrms) :2.
4K UHD Hi-end 媒体播放器 性能参数 耳机 6.35mm 单端输出 模拟音频特性 第4页 低增益模式 输出电平 (Vrms): 1.5Vrms 输出功率 / 耳机阻抗 :138mW/32Ω 总谐波失真 (THD+N): -108dB(0.0004%) 底燥 (Noise): 3.2uVrms 信燥比 (SNR): 112dB(20Hz-20kHz) 频率响应 (frequency response): ±0.25dB(20Hz-20kHz) 通道分离度 (CROSSTALK): -128dB(1kHz,Fs=44.1kHz) 动态范围 (DNR): 110dB 高增益模式 输出电平 (Vrms):2.6Vrms 输出功率 / 耳机阻抗 :42mW/300Ω 总谐波失真 (THD+N) -108dB(0.0004%) 底燥 (Noise): 3.3uVrms 信燥比 (SNR) :114dB(20Hz-20kHz) 频率响应 (frequency response) :±0.25dB(20Hz-20kHz) 通道分离度 (CROSSTALK): -132dB(1kHz,Fs=44.
硬件端口介绍 1. 前面 开关 4.4mm 平衡 耳机接口 OLED 显示屏 6.35mm 耳机接口 音量旋钮 USB2.0 ① 触屏控制 NEO S 机身屏幕,可通过屏幕触摸对本机进行常规选择控制。 ② 电源键(Power) 对本机开关机控制。 ③ 音量旋钮(Volume) 对整机音量大小进行调节,顺时旋转增加输出音量,逆时旋转减小输出音量。 *DAC 输出模式下,可根据需要在 DAC 设置中,自定义音量递增调节的幅度(0.
4K UHD Hi-end 媒体播放器 ④ 遥控器控制 NEO S 配备了,蓝牙红外双模遥控器,使用前建议按照开机向导中蓝牙配对指引进行遥控配对。 控制对象:遥控器控制,可以选择控制对象是大屏或小屏,默认是自动模式。 更改控制对象: 机身设置―― 通用设置―― 遥控器作用于 自动:本机 HDMI 未连接任何显示设备时,遥控对本机屏幕(小屏)进行控制,当连接有 HDMI 设备时,将对连接的显示设备(大屏)进行控制 前置显示屏:此选项仅控制本机显示屏 外接显示设备:此选项仅控制连接的显示设备(大屏) 2. 背面 电源开关 电源插座 注意: 天线 RST 1000M 以太网 HDMI 输出 使用前,请安装好天线 第6页 天线 天线 USB3.
一 . HDMI 设备的连接 连接与安装 1. HDMI 连接电视 确保电视和NEO S都处于断电状态,将HDMI线一头插入本设备的HDMI输出端口,另一头连接 至电视机的HDMI 输入接口,设备开机再将电视的信号源设置切换至对应的端口。 HDMI 线 电视 注意: * 为了能够享受4K超高清HDR效果,请使用满足HDMI2.0以上版本的HDMI线、以及显示设备。 * 为了确保更佳的电影观赏效果体验,在播放本地影片时系统将会关闭机身小屏的显示。 2.
4K UHD Hi-end 媒体播放器 注意: * 为了能够获得4K超高清HDR效果,除了HDMI线和显示设备,请确保连接的AV接收器也可以满 足相应的技术规格。 * HDMI音频输出与DAC模拟音频无法同时选择输出,以上连接需将音频源设置为数字输出,才 会从HDMI通道输出音频。 设置方式:系统设置 ―― DAC音频 ―― 音频源 ―― 数字输出(关闭DAC) * 本机HDMI 输出支持源码透传,如果AV接收器可以支持更先进的音频格式,请将HDMI音频设 置输出模式设置为源码输出。 设置方式:系统设置 ―― 音频源设置 ―― HDMI音频 ―― 源码透传 二 . 音频输出的连接与安装 1. 数字音频输出连接音频接收器 本机数字音频输出,包括了HDMI音频输出、同轴、USB音频、蓝牙音频的输出,选择通过数字 音频输出时,请将音频源选择为“数字输出”,DAC音频会关闭。 ① 通过同轴连接解码器或AV接收器 使用数字同轴音频线,将本机的同轴输出接口连接至AV接收器的对应的同轴输入端口,再将连 接的解码器或AV接收器的信号源,切换至对应输入端口。 同轴线 注意: 光纤/同轴最高支持5.
② USB音频输出连接解码器 使用USB音频数据线,将本机任意 USB Type-A接口连接到具备USB 音频输入的解码器接口。 USB Type-A 转 Type-B 音频数据线 USB Type-B 音频解码器 注意: * 选择此通道输出本机,对应设置:音频设置 ―― USB音频 * USB音频输出会因搭配解码器不同,兼容性会有差异,遇到无法兼容的解码器,请和我们技 术支持联系反馈。 2.
4K UHD Hi-end 媒体播放器 RCA 型音频线 XLR 平衡音频线 两声道 HiFi 音响系统 (HiFi 后级 / 有源监听音箱) 注意: * 本机配备了两组独立立体声输出端口:RCA型和XLR型平衡端口可同时输出音频信号, 二者选 择一种即可,建议优先选择XLR平衡端口连接,可获得更佳的噪音抑制和信号完整性。 * NEO S的平衡输出为三插脚XLR公型端口,输出一对差分信号(正/负信号),后级电路可以 通过比较这对信号的电压差值,抵消共模噪声,提升原始信号的完整性。 * 在某些音频系统上,正负极性是对调的,NEO S默认为正向极性如下示意,如需对调极性,可 以在系统设置菜单 ―― DAC音频 ―― XLR极性设置为反向 正(+) 地 负(-) 地 负(-) 正(+) 正向极性示意图 + 系统正向设置 反向极性示意图 + 系统反向设置 ② 耳放输出连接耳机 本机具备耳放功能,前面板提供有两个耳机输出,6.35mm单端和4.4mm平衡输出接口,请将 同标准的耳机插头连接至本机对应耳机接口。 4.4mm 平衡耳机线 6.
注意: * 本机推荐匹配耳机阻抗范围16-300Ω (低增益模式:16-32Ω/高增益模式32-300Ω)。 * 耳放增益模式切换:通过本机屏设置,设置 ―― DAC设置 ―― 耳机增益设置(低增益/高增 益) * 模拟输出同时连接优先级:6.35mm耳机输出优先于4.4mm平衡耳机输出优先于XLR平衡/RCA 输出。 三 . 数字音频输入源设备的连接 1.
4K UHD Hi-end 媒体播放器 2.
3. 蓝牙音频输入 本机内置了一枚独立CSR8675旗舰蓝牙音频模组,支持SBC、AAC等无损音频协议,可接收来 自移动设备无损发送蓝牙音频信号,本机作为高品质蓝牙解码器使用。 需在系统对应音频源设置中切换输入源为: 音频源设置 ―― 选择 可。 蓝牙输入,在移动端打开蓝牙搜索设备“NEO S”,配对即 四 .
4K UHD Hi-end 媒体播放器 初始化设置 NEO S在正式使用前,首次开机屏幕将会先进入系统的初始化配置,初始化设定分为大屏( HDMI输出到显示设备的画面)与小屏(机身显示屏幕),机器将会根据实际设备的连接情况来 自动选择初始化页面从大屏或小屏呈现,即:如果HDMI连接大屏,将会仅通过大屏来完成初始 化,反之没有连接HDMI大屏的情况下,将会通过机身屏幕来完成初始化。请按照系统流程与指 引来设置您的设备,以获得更佳的使用体验。 一 .HDMI 大屏系统初始化配置 1.
根据您所处地区选择对应系统显示的时区。 2.
4K UHD Hi-end 媒体播放器 3. 网络设置 设置相关网络配置,让机器快速连接网络。 无线网络(WI-FI):选择网络 SSID,输入密码,连接 Wi-Fi。 有线网络:只需插入网线即可自动连接网络。 4.
专家模式:音视频输出为自定义选择模式,可根据设备连接和支持的规格选择相应的音视频输 出,此模式建议专业人员操作。 5.
4K UHD Hi-end 媒体播放器 二 . 机身屏幕初始化配置 1. 系统语言选择 根据需要,选择系统显示语言。 2.
3. 网络设置 设置相关网络配置,让机器快速链接网络。网络分为无线网络和有线网络,请选择其中一种方 式连接成功即可。 4.
4K UHD Hi-end 媒体播放器 文件管理器 一 . 本机屏幕文件管理器的编辑功能使用 通过NEO S本机屏幕打开文件管理器,可对文件进行常规的编辑操作,本机内置硬盘、USB外 接存储设备以及网络服务器中的媒体文件进行复制、粘贴、剪切以及删除操作,外部存储的文 件快捷复制到本机内置的SSD等功能。 1. 外部存储设备文件快捷拷贝到本机SSD 文件管理器,选择一个设备文件目录,点“编辑”―― 全选/单选 需要拷贝的母版文件夹/文 件,点“复制到SSD”即可,也可以通过下面方式进行拷贝。 2.
3. 文件的删除 文件管理器,选择一个设备的文件目录,点“编辑”―― 点全选/单选 需要删除的文件或文件 夹,选确认即可。 注意: * 在网络存储设备中对文件粘贴操作,需该设备具备写入权限。 * 删除文件,将会彻底删除所选文件数据无法恢复,请谨慎操作。 二 . 大屏文件管理器的编辑和管理功能使用 使用NEO S的 HDMI 连接显示大屏操作系统时,通过大屏系统文件管理器可以对储设备进行更 多的编辑功能和管理操作,功能如下: 1.
4K UHD Hi-end 媒体播放器 2.
音乐播放器 本机系统内置了一款高清音乐播放器,可支持播放内置SSD的、本地硬盘、局域网NAS等存储 设备中的高清无损音乐,还可以跨设备将所有音乐文件一次性添加到音乐播放器,经过智能匹 配,自动为我们生成音乐库,音乐资源的分类管理、收藏、查找以及点播将更直观便捷。 一 . 本地音乐文件的添加 1. 使用机身显示屏添加 打开本机,在屏幕主界面,确保网络连接成功,点击“音乐库”――“文件夹”――点击“添 加音乐目录”――选择音乐所存储的设备(硬盘、NFS/SMB家庭网络服务器),找到音乐所在 的文件目录――点击确认,等待扫描完成即可。 * 长按添加的文件目录可以进行全部播放、扫描和移除的操作。 2. 使用HDMI外接的显示屏添加 添加方法与以上机身小屏方法大致相同,首次使用可根据屏幕指引添加设备,扫描音乐文件目 录即可。 二 .
4K UHD Hi-end 媒体播放器 三 . 音乐播放状的态显示和播放控制 音乐正在播放的详情页面可以显示当前曲目的专辑封面、歌曲名、采样规格、播放进度以及控 制按钮。 播放模式切换 收藏 播放控制 播放队列 1.
2. 音乐的收藏 ① 当前播放的单曲收藏:正在播放音乐的详情页,点击 直接收藏当前播放的歌曲 ② 单曲目录自由选择收藏:艺术家、专辑、文件夹中展开的音乐列表中长按需要收藏的歌曲, 在弹出的菜单中选择收藏 ③播放队列批量收藏:音乐当前播放的详情页,点击播放队列,点击右上角 直接批量收 藏当前全部播放队列的音乐,通过此方式可以收藏某个艺术家、专辑下的全部曲目。 3. 新建或添加我的歌单 ① 新建和添加单曲到歌单:在收藏、艺术家、专辑、文件夹中展开的音乐列表,长按单个歌曲 在弹出的选框中选择“添加到歌单”――“新建歌单”―― 输入需要新建歌单名称,再选择新 建好的歌单,即可添加成功。 ② 批量添加到歌单:在音乐当前播放的详情页,点击播放队列,点击右上角 “ 添加 ”按钮――>选择需要新建或者建好的歌单,即可将当前播放队列的全部歌曲批量添加 到所选歌单中。 四 .
4K UHD Hi-end 媒体播放器 智能手机 APP 控制 用户在移动手机端安装ZIDOO Controller 控制APP,可以通过手机控制Zidoo播放器的所有功 能,包含文件管理器、应用、音乐播放器、海报墙数据的浏览控制以及对本机系统的设置。 ① 应用安装 请参照电视屏幕打开设备“所有应用程序 ―― 控制中心”或者进入机身屏幕,“设置――控制 中心”,扫描对应系统平台的二维码,下载安装。应用支持安卓与苹果系统,也可以在本手册 第30页,扫描对应二维码下载安装。ISO系统在手机“Apple Store”搜索“Zidoo”下载安装。 ② 设备的连接 应用安装完成后,确保设备连接网络,且移动设备与播放器处在同一个局域网内,按照以下步 骤添加设备。 连接步骤:打开手机控制APP“ + 添加―― 扫描设备控制中心二维码或点扫描”,在设备屏幕 弹出控制授权,点击确认即可连接。 第 26 页
OTA 系统升级 芝杜 Zidoo 会不定期对机器系统进行固件升级。新固件发布后,可以通过 OTA 系统升级,获得 新的功能体验。NEO S OTA 系统升级,通过大屏或者小屏均可进行升级操作,并支持在线网络 升级与本地升级两种方式。 一 . 通过大屏升级系统 1.
4K UHD Hi-end 媒体播放器 2. 本地U盘升级 通过官方公众号或者官网等渠道手动下载本机升级文件包至U盘中,将含新版升级文件的U盘接 入机器,升级页面点击“本地升级”选项,选择升级文件包(无需解压),按照屏幕提示完成 升级操作,待升级完成机器重启即可。 二 .
1. 在线升级 在升级页面,点“在线升级”选项,将通过网络获取最新升级信息,按照屏幕提示完成升级, 等待升级完成机器自动重启。 2.
4K UHD Hi-end 媒体播放器 资源下载: * 推荐使用手机浏览器扫描二维码。 IOS 控制 APP Android 控制 APP RS232 协议代码 特别说明: 为了提升用户体验,芝杜会不定期对产品固件进行更新。因此,本说明书内容,可能会与产品 实际使用有所出入的情况。更多新功能的使用,请在官网下载电子档新版说明书。 安全警示: 1.本设备不得遭受水溅或水滴,不得在设备上放置类似花瓶一类装满液体的物品。 2.本产品断开装置为输入插座,配备给本产品使用的插座应当装在本产品附近,且应当便于操 作,不能被其他物体阻挡。 3.
NEO S Introduction NEO S is an all-in-one HiFi solution, which solves complicated device matching and connection problem and combines 4K UHD media player, music streaming media player, audio and video media center, high-fidelity headphone amplifier, music decoder and Bluetooth decoder. As a 4K UHD media player, it can decode and output advanced 4K 12Bit HDR10+/Dolby vision. NEO S can play music from a variety of input sources, such as internal SSD, hard drive, computer and NAS server.
4K UHD Hi-end Media player Chassis Display Specification Aviation aluminum alloy 5-inch OLED HD touch screen CPU Realtek RTD1619DR ARM Cortex-A55(hexa-core) Internal Storage 2GB DDR4 (RAM)+16GB eMMC DAC ES 9068*2 GPU Internal SSD ARM Mali-G51 MP3 256G SSD hard drive Wi-Fi 2.4G+5G dual band WiFi, 802.11 a/b/g/n/AC 2T2R MIMO 867Mbps HDMI Output 2.
Specification XLR(balanced) Output Output Level: 4.1 Vrms THD+N: -110dB(0.00031%) Noise: 2uVrms SNR: 118dB(20Hz-20kHz) Frequency response: ±0.25dB(20Hz-20kHz) Crosstalk: -120dB(1kHz,Fs=44.1kHz) DNR: 116dB RCA Output Analog Audio Characteristics Output level: 2.16 Vrms THD+N: -109dB(0.00035%) Noise: 2.5uVrms SNR: 115dB(20Hz-20kHz) Frequency response: ±0.258dB(20Hz-20kHz) Crosstalk: -130dB(1kHz,Fs=44.1kHz) DNR: 114dB Headphone 4.4mm Balanced Output Low-gain mode Output level: 2.
4K UHD Hi-end Media player Specification Headphone 6.35mm Single End Output Analog Audio Characteristics Page 34 Low-gain mode Output level: 1.5Vrms Output Power/ Headphone impedance: 138mW/32Ω THD+N: -108dB(0.0004%) Noise: 3.2uVrms SNR: 112dB(20Hz-20kHz) Frequency response: ±0.25dB(20Hz-20kHz) Crosstalk: -128dB(1kHz,Fs=44.1kHz) High-gain mode Output level: 2.7Vrms Output Power/ Headphone impedance: 47mW/300Ω THD+N: -108dB(0.0004%) Noise: 3.5uVrms SNR: 114dB(20Hz-20kHz) Frequency response: ±0.
Hardware Introduction 1.Front POWER 4.4mm BALANCED OLED TOUCH SCREEN 6.35mm HEADPHONE VOLUME KNOB USB2.0 ① Touch screen Most operation can be done by touch screen. ② Power Turn on/off the device. ③ Volume knob Rotate clockwise to increase volume while counterclockwise to decrease volume. *Under the DAC IN mode, volume can be adjusted with step 0.5db~3db in DAC setting.
4K UHD Hi-end Media player You can choose to control the large screen or small screen by remote. It is automatic mode by default. There are three modes on touch screen �Setting — General setting — The remote control acts on �. Auto mode:the remote will control the touch screen (small screen) when display device are not connected, otherwise it will control display device (large screen). Front display: only control touch screen (small screen).
Connection and Installation 1. HDMI Device Connection ① Connect with TV Make sure both TV and NEO S are power-off, connect these two devices by HDMI cable from NEO S HDMI OUT port to TV HDMI IN port. And choose the correct signal source on TV after powering on. HDMI cable TV Note: *Please use HDMI 2.0 or higher-specification cable and display device to enjoy 4K UHD HDR experience. *The small screen will be turned off when playing movie to ensure better movie viewing experience.
4K UHD Hi-end Media player Note: * In order to get wonderful 4K UHD HDR experience, please ensure that HDMI cable, display device and AVR all can meet the corresponding technical specifications. * HDMI OUT and DAC analog cannot output at the same time. It is needed to turn off DAC to output audio from HDMI: Settings > DAC Audio > Source In > Digital Output (Turn Off DAC).
❷ Connect DAC by USB Audio Output Connect NEO S USB Type-A port with DAC USB DAC IN port by USB audio cable. USB type-A to USB type-B cable Audio DAC/Audio decoder Note: * Corresponding setting: Settings > Audio > USB Audio * Please contact with Zidoo tech support if you meet incompatible situation when connecting USB audio output to some DAC ② Analog Output Analog audio output includes RCA, XLR and headphone jacks, all of them are decoded and output by the ES 9068 DAC.
4K UHD Hi-end Media player ❶ RCA, XLR output Connect NEO S with active speaker or HiFi poweramp by using a pair of RCA or XLR balanced analog audio cables. RCA-type audio cable XLR balanced audio cable Stereo HiFi audio system (HiFi headphone amplifier /Active monitor speaker) Note: * NEO S is equipped with two independent stereo output ports: RCA and XLR balanced ports can output audio signals simultaneously.
❷ Headphone Amplifier Output There is two headphone ports including 6.35mm and 4.4mm balanced amp output on NEO S front panel. Please connect to corresponding port according to your demand. 4.4 mm balanced headphone cable 6.35mm single headphone cable Note: * Recommended headphone impedance range for the device is 16-300Ω (low-gain mode: 1632Ω/ high-gain mode: 32-300Ω).
4K UHD Hi-end Media player 3. Digital Audio Input ① USB Audio Input NEO S can be connected with PC, USB audio output device and mobile phone by using a USB Type-A to USB Type-B cable. This connection method allows NEO S to be used as a high-performance pure DAC. The digital signal input by the external player has been decoded by ES9068 DAC decoding chip, so that it provides the best audio decoding performance.
② Coaxial/Optical and AES/EBU Audio Input ❶ Coaxial Audio Input A 75 ohm coaxial cable is used to connect coaxial output port of a playback device to the digital coaxial port of NEO S, changing to optical cable if you connect to optical port.
4K UHD Hi-end Media player 4. Music Streaming Multiple protocols are supported by NEO S. AirPlay, DLNA and Spotify can push music from the mobile device to NEO S in the same LAN. Airplay: Turn on �Media Center――>AirPlay� on NEO S touch screen. Play local music files or online files in music application from IOS device, then click Airplay icon to push it to NEO S. DLNA: Turn on �Media Center――>DLNA� on NEO S display screen. Access app on mobile device with DLNA support, play music and cast screen to NEO S.
Boot and Initial Setup Wizard NEO S will enter into initial setup wizard when it is booted for the first time, which will be displayed on large screen (display device) or small screen (NEO S OLED touch screen). If it is detected that NEO S has connected with display device by HDMI cable, initial setup wizard will show on large screen. Otherwise it will show on small screen. Please follow the system guidance to finish setting. 1.
4K UHD Hi-end Media player Press the UP and DOWN buttons on remote control to adjust screen display area. Select the time zone for the system according to your location.
② Bluetooth Match-Up Let remote controller be aligned with media player and press Page-Down KEY and Menu KEY at the same time until indicator light blinking.The light will be off after matching successfully. Note: * Make sure Bluetooth antenna is installed. * When large display device like TV connects with NEO S by HDMI cable, only large display screen can be controlled by the remote. ③ Network Setting Configure network to connect device with network quickly.
4K UHD Hi-end Media player WI-FI: choose network SSID, input password and connect WIFI. Ethernet: plug in the network cable to connect the network automatically. ④ Select output mode Please select the corresponding mode according to your needs, then it will finish relevant setting. Wizard mode: select the corresponding option according to your usage environment and device connection. Expert mode: The audio and video output is customized by users, it is recommended for professionals.
⑤ The key definition Define the corresponding functions for number keys, timing key, subtitle key, audio key, up and down keys and page keys on the remote control according to your usage habits. After completing settings above, please follow prompts and click�Next�to finish initial setup. Enjoy Zidoo audio visual feast! 2. Initial Setup Wizard on Small Screen ① System Language Selection Select the system language according to your demand.
4K UHD Hi-end Media player ② Bluetooth Match-Up Let remote controller be aligned with media player and press Page-Down KEY and Menu KEY at the same time until indicator light blinking.The light will be off after matching successfully. Note: * Make sure Bluetooth antenna is installed. * When no large display device like TV connects with NEO S, only OLED screen can be controlled by the remote. ③ Network Settings Choose Ethernet or WiFi to connect the device with network quickly.
File Manager 1.File Manager on Small Touch Screen We can edit files on NEO S touch screen, copy files from external storage devices to internal SSD and copy/paste/cut/delete files in hard drive, USB storage device and network server. 1. Copy files from external storage device to internal SSD Select the file directory in File Manager, choose �Edit > Select all/one folder/one file�, then click �Copy to SSD�. 2.
4K UHD Hi-end Media player 2.File Manager on Large Display Screen There are more functions in File Manager as follows when operating on large display screen: 1. Uninstall and format the hard disk Press left arrow key in File Manager to choose storage device, then press the key again to uninstall or format hard drive. Uninstall: Uninstall the connected USB storage device. Format: Format the USB storage device. Rename and format selection are supported.
2. Relevant file operation Press �Menu� or �Right arrow� key on large screen to finish operations as below.
4K UHD Hi-end Media player Music Player NEO S Music Player can play lossless music from internal SSD, external hard drive and NAS in same LAN. Music files are added across different devices to generate music library, so that music resources can be managed, collected, searched and played more intuitively and conveniently. 1.Adding Local Music Files It is recommended to add files from USB stick, hard drive and network server at a time to Music Player. ①.
Play Mode Switch Favorite Play Playing queue ①. Buttons description Favorite: add the currently playing song to my favorites. Control buttons: previous song/next song, pause/play layback mode switching button: switch modes among list play,shuffle play, list cycle and single cycle. Playing queue: check music playback order in the queue. For example, when playing songs from the artist category, the playing queue will include all songs in artist category. ②.
4K UHD Hi-end Media player ③. Create and add to playlist ❶ Create and add single to the playlist: Long press a single song and select �Add to Playlist� in the pop up box > �Create Playlist�- > Enter the name of the new playlist, then select the single into the new playlist. ❷ Add to playlist in batch: Click the playing queue in the top-right corner of music playback page. Click �add� icon, select all music in playing queue to playlist. ④ .
Smart Control Users can control Zidoo media players by installing Zidoo Controller APP. File manager, applications, music player, poster wall and settings can all be controlled. ❶ Application Installation Please find �All APPs > Control Center� on display device or �Settings > Control Center� on NEO S touch screen, then scan the QR code to download the APP. Zidoo Controller APP can be downloaded on iPhone by searching �Zidoo� in�Apple Store�.
4K UHD Hi-end Media player ① Online Update Click the �online update� option to obtain the latest firmware information through the network. Follow instructions to update and wait the device to restart automatically after the update is finished. ② USB Update Download firmware from official website to a USB stick, insert the USB stick to the device, and then click �USB update�option. Follow instructions to update and wait the device to restart automatically after the update is finished.
2.Update on NEO S OLED Screen Firstly find �Settings > Generic Setting > Update � on NEO S OLED screen. ① Online Update Click the �online update� option to obtain the latest firmware information through the network. Follow instructions to update and wait the device to restart automatically after the update is finished.
4K UHD Hi-end Media player ② USB Update Download firmware from official website to a USB stick, insert the USB stick to the device, and then click �USB update�option. Follow instructions to update and wait the device to restart automatically after the update is finished. Special Note: In order to improve the user experience, Zidoo will update firmware from time to time. Therefore this product manual may differ from the actual setting menus of the product.
FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.