User manual

Matrix Switching System—User Manual
7
3.0 Specifications
General
Power
100VAC~240VAC, 50/60Hz, Automatic Switch
Housing
Black Aluminum
Mounting
Rack mountable (2U-rack-mount kits)
Weight
3135 g
Dimensions (LxWxH)
300x482x90mm (2U high, full rack wide)
Frequency Response
20Hz to 20kHz
Volume
0dB to -78.75dB
Subwoofer
0dB to -37.5dB (150Hz Low pass filter )
Bass and Treble
-14dB to +14dB
Lip-sync (Delay)
5ms for a unit (0ms, 5ms, 10ms,….1sec)
Impedance
Input: 10k ohm, unbalanced
Output Volume Range
0 to -64 (0 to -78.75 dB, mute) in -1.25 dB
increments from steps 0 to -64 mute; default is 0 dB
Audio Signal
Input Ports
RCA Female Ports (L / R)
Output Ports
RCA Female Ports (L / R Subwoofer)
Signal Type
Stereo, Unbalanced Connection
Impedance
Input:10kΩ
Control Information
Baud rate
9600 bps; 8 data bits, 1 stop bit, no parity
Ethernet protocol
HTTP, DHCP, TCP/IP, ICMP (ping)
Program control
Web Server, AVM Application
Serial Control Port
RS-232, 9Pin Female D Type Connector
RS-485, 1X5 Pole Captive Screw
Control Sequence
Matrix
Remote Control
Remote Controller, IR Receiver
Web Server
LAN, RJ-45
Fire Alarm
1 X 2 Pole Captive Screw