User manual

Matrix Switching System—User Manual
8
4.0 Device Installation
The Matrix Switching device has a black metallic housing. It can be placed on a sturdy
desk directly or installed on a 19-in bracket. See Figure 4-1 below:
Figure 4-1 mounts the Device on a Standard Bracket with 2U Rack-mount
5.0 Front/Rear Panels
5.0.1 Front Panel
Figure 5-1 AX-88 Front Panel
The AX-88 Matrix Switching System supports up to 8 Output/Input switching keys on the
Front Panel allowing you to switch signals quickly.
There are four kinds of button combinations as below:
Operation method No. 1:“Output Channel”+“Input Channel”
Press the Output key then select the Input key to set the combinations.
Operation method No. 2:“STO”+“Output/Input Channel”
Press the STO key then select the Output/Input key. Refer to 8.0 Operation Examples
Operation method No. 3:“RCL”+“Output/Input Channel”
Press the RCL key then select the Output/Input key to retrieve the combinations.
Refer to 8.0 Operation Examples
Operation method No. 4: Single Operation
This example is for audio configuration keys, click the VOL+, VOL-, MENU, MUTE,
 Or  key directly.
 OUT1~8 keys (output channel): Specify the Channel 1~Channel 8 for audio signal
output to broadcast peripherals. These keys configure the status/access the settings.
 IN1~8 keys (input channel): Specify the Channel 1~Channel 8 for audio signal input.
Use these keys to switch to the connected input signal source channels.