Model No ZIG-CX-100 Operating Instructions Thank you for purchasing this product. Please be sure to read the instruction manual carefully.
Introduction The ZIGEN ZIG-CX-100 is a transmitter / receiver extender kit for long distance transmission of HDMI video and embedded audio plus bi-directional control signals over a single Coaxial cable. The ZIG-CX-100 can be used as a point-to-point solution or integrated with Matrix switching equipment to extend inputs or outputs to remote locations.
Contents HDMI Extender ................................................................................................ 1 Product Overview ............................................................................................. 1 Features ........................................................................................................... 1 Package Contents ............................................................................................ 3 Connections and Operations....................
HDMI Extender (By single coax cable) ■ Product Overview ( Model Number: ZIG-CX-100 ) ■ Features • Extend HDMI signal by using a single RG-6QUAD coaxial cable. 1080p/24Hz with 3D up to 330-ft/100 meters or 1080p/60Hz up to 330-ft / 100-meters. Extend HDMI signal by using a single RG-59 coaxial cable. 1080p/24Hz with 3D up to 165-ft/50 meters. Auto-adjustment of feedback. HDMI V1.4 supported. HDCP compliant. Full HD support: 1080p@24/50/60Hz. LED indicators show power a n d status signal.
..§ Notice ZIGEN, Inc. reserves the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice. Warning To reduce the risk of fire, electric shock or product damage: 1. Do not expose this apparatus to moisture. 4. Clean this apparatus 2. Do not install or place this unit 5. Unplug this apparatus in confined spaces. Ensure the during lightning storms or unit is well ventilated. when unused for long only with dry cloth. periods of time.
■ Package Contents ① Main unit ZIG-CX-100 Rx. ② Main unit ZIG-CX-100Tx. ③ Operating instructions. ④ 2x 5V 3A DC power supply. ⑤ 1xIR TX unit. (IR emitter cable) ⑥ 1xIR RX unit. (IR receiver cable) NOTE: PART NUMBER (Abbreviation as P/N) ■ Connections and Operations 1) Connect the HDMI input source ( such as HD-DVD、PS3、STB etc. ) to ZIG-CX-100 Tx. 2) Connect a COAX cable from SDI OUT1/SDI OUT2 of ZIG-CX-100 Tx to SDI input of ZIG-CX-100 Rx.
※DIP switch setting instruction: ZIG-CX-100 Tx Position1 Function 0 Transfer video with AUTO mode. 1 The input signal after processed output.. Position2 Function 0 1080P stereo (Using Embedded EDID) (note1) 1 Trigger EDID Copy. Position3 Position4 Function 0 0 1080P 3D 2CH (Using Embedded EDID) (note2) 0 1 1080P 8CH (Using Embedded EDID) (note3) 1 0 1080P 3D 8CH (Using Embedded EDID) (note4) 1 1 EDID copy Note1: This is EDID COPY trigger switch. When Position 3 - Position 4 is 1.
ZIG-CX-100 Rx Position1 Function 0 Transfer audio for AUTO mode (note1). 1 The input audio bypassed to output. Position2 Function 0 Output HDCP determined by the sink. 1 Do not encrypt output. Position3 Function 0 24 bit output. 1 Normal mode, color depth determined by the sink. Note1: If audio signal is PCM 48K, The input audio will be bypassed to output.
■ Specifications Operating Temperature Range -5 to +35°C (-41 to +95 °F) Operating Humidity Range 5 to 90 % RH (no condensation) Input Video Signal 0.5-1.
W NOTE1: Specifications are subject to change without notice. Mass and dimensions are approximate. ■ Panel Descriptions 1.
2.
■ Typical Application ■ Maintenance Clean this unit with a soft, dry cloth. Never use alcohol or paint thinner to clean this product.
the unit beyond that described in these operating instructions. Refer all other servicing to authorized servicing personnel. 3) Replacement parts: When parts need replacing ensure the service center uses parts specified by the manufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.
Items integrated into ZIGEN products that are made by other manufacturers, notably computer hard drives and liquid crystal display panels, are limited to the term of the warranty offered by the respective manufacturers. Such specific warranties are available upon request to ZIGEN. ZIGEN makes no other representation of warranty as to fitness for the purpose or merchantability or otherwise in respect of any of the products sold.
COMPLIANCE The ZIG-CX-100 HDMI over Single coax Extender has been tested for compliance with appropriate FCC and CE rules and regulations and is also RoHS compliant. The Power Adapter has been tested for compliance with UL, CE and CSA rules and regulations and is also RoHS compliant. TECHNICAL ASSISTANCE Technical Support： Telephone (818) 654-5252 Technical Support Hours： 8:00 AM to 5:00 PM Monday thru Friday, Pacific Standard Time. Write To： ZIGEN INC. 6934 CANBY AVE. SUITE 107 LOS ANGELES, CA.
