Pocket Printer USER GUIDE
Thank you for purchasing the Polaroid Mint Pocket Printer. This User Guide is intended to provide you with guidelines to ensure that operation of this product is safe and does not pose risk to the user. Any use that does not conform to the guidelines described in this User Guide may void the limited warranty. Please read all directions before using the product and retain this guide for reference. This product is intended for household use only. This product is covered by a limited one-year warranty.
BE SAFE WITH POLAROID MINT • Never leave your printer or the ZINK® paper in an area that might become extremely hot or where it will be exposed to direct sunlight for a long time. This can cause your printer to overheat or suffer other problems. • Don’t get it wet! If you need to clean your printer, use a soft cloth that’s been slightly dampened with water or rubbing alcohol, and gently wipe away 4 any dirty spots. Don’t submerge the whole thing in water, ever. • Be careful with your printer.
WHAT COMES IN THE BOX? Polaroid Mint Pocket Printer GET TO KNOW YOUR PRINTER Micro USB Charging Cable 1. Power Button 2.Micro USB Charging Port 3.Charging Indicator Light 4.
GETTING READY 1. Charge it first: Before you start using your new Polaroid Mint printer, plug it into your computer or any USB charging block with an output of one amp (1A) or higher. The charging indicator will stay red while the printer charges. Once it turns green, it’s fully charged and ready to use. The full charging process usually takes approximately two (2) hours. 2.
START USING POLAROID MINT! is on, the calibration sheet will be ejected from the photo print slot when you print your first photo. NOTE: Please make sure not to push the paper in too far or else the paper 10 could jam or cause misprinting issues. 3. Download the Polaroid Mint application from the Google Play™ or Apple® App Store®. You will need the app installed on your phone for the printer to work. 1. Turn the printer on by pressing the power button on the side for two (2) seconds. 2.
SPECIFICATIONS should say “paired”. 3. Open up the Polaroid Mint application from your phone, and start using your new Polaroid Mint Pocket Printer! 12 • Dimensions: 4.5" L x 3" W x 0.7" D (116 x 77 x 18mm) • Weight: 5.
Questions? Concerns? Get in Touch! cspolaroid@camarketing.