MSDS

surfaces or spray mist and the actual concentration of Titanium Dioxide in the formula.
May cause central nervous system disorder (e.g., narcosis involving a loss of coordination, weakness, fatigue,
mental confusion, and blurred vision) and/or damage. Reports have associated repeated and prolonged
occupational overexposure to solvents with permanent brain and nervous system damage.
Primary Route(s) Of Entry: Skin Contact, Skin Absorption, Inhalation, Ingestion, Eye Contact
First Aid - Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes holding eyelids open.
Get medical attention. Do NOT allow rubbing of eyes or keeping eyes closed.
First Aid - Skin Contact: Wash with soap and water. Get medical attention if irritation develops or persists.
First Aid - Inhalation: If you experience difficulty in breathing, leave the area to obtain fresh air. If continued
difficulty is experienced, get medical assistance immediately.
First Aid - Ingestion: Aspiration hazard: Do not induce vomiting or give anything by mouth because this material
can enter the lungs and cause severe lung damage. Get immediate medical attention.
Flash Point: -99 F (Setaflash)
Extinguishing Media: Film Forming Foam, Carbon Dioxide, Dry Chemical, Dry Sand, Water Fog
Unusual Fire And Explosion Hazards: Perforation of the pressurized container may cause bursting of the can.
FLASH POINT IS LESS THAN 20 °. F. - EXTREMELY FLAMMABLE LIQUID AND VAPOR! Water spray may be
ineffective. Closed containers may explode when exposed to extreme heat. Vapors may form explosive mixtures
with air. Vapors can travel to a source of ignition and flash back. Isolate from heat, electrical equipment, sparks
and open flame. Keep containers tightly closed.
Special Firefighting Procedures: Evacuate area and fight fire from a safe distance.
Steps To Be Taken If Material Is Released Or Spilled: Contain spilled liquid with sand or earth. DO NOT use
combustible materials such as sawdust. Remove all sources of ignition, ventilate area and remove with inert
absorbent and non-sparking tools. Dispose of according to local, state (provincial) and federal regulations. Do not
incinerate closed containers.
Handling: Wash thoroughly after handling. Wash hands before eating. Use only in a well-ventilated area. Follow
all MSDS/label precautions even after container is emptied because it may retain product residues. Avoid
breathing vapor or mist.
Storage: Contents under pressure. Do not expose to heat or store above 120 ° F. Do not store above 120 ° F.
Store large quantities in buildings designed and protected for storage of NFPA Class I flammable liquids. Keep
containers tightly closed. Isolate from heat, electrical equipment, sparks and open flame.
Section 4 - First Aid Measures
Section 5 - Fire Fighting Measures
Section 6 - Accidental Release Measures
Section 7 - Handling And Storage
Section 8 - Exposure Controls / Personal Protection
Page
2
of
5
1008 BIN 130Z 6PK SPRAY