Use and Care Manual

TECHNICAL DATA
PERMA-WHITE
®
MOLD & MILDEW-PROOF
™
INTERIOR PAINT
Form: GDH-76
Rev.: 102016
2
.PRODUCT APPLICATION (cont.) .
THINNING
Perma-White is formulated to be used without thinning. If
thinning is necessary (conventional spray applications),
add no more than 10% by volume of fresh water
LIMITATIONS
Perma-White Mold & Mildew-Proof Interior Paint is not
intended for application to floors or any surface subject to
immersion or prolonged contact with water including
shower enclosures, saunas or steam rooms. Not
recommended for use in HVAC duct work.
TINTING
Perma-White is bright white but may be tinted to off-white,
pastel or medium colors with a maximum of 4 ounces of
universal colorant per gallon. Start with 75% of the tinting
formula for a given color and adjust if necessary. Multiple
containers of tinted paint should be intermixed (boxed) to
ensure color uniformity. Shake or stir well before using.
DRY TIME
Dries to the touch in 30 minutes and can be recoated 2
hours after applying the first coat. Scrape resistance over
glossy surfaces develops in 5 to 7 days. Do not scrub the
new coating for seven days.
.PRODUCT APPLICATION (cont.) .
CLEAN-UP
Clean up spills and paint drips with detergent and warm
water. Wash application tools in detergent and warm water
immediately use. If product has dried on application tools,
soak overnight in a solution of equal parts household
ammonia and water. Follow equipment manufacturer’s
directions to clean spray equipment. Dispose of unused or
unwanted product in accordance with local laws regulating
water-based coatings.
STORAGE
To prevent product from skinning over, close container after each
use. Keep lid tightly closed during storage. Protect from freezing.
If contents freeze, thaw to room temperature before using.