MSDS

N/A: Not Applicable N/D: Not Determined N/E: Not Established N/R: Not Required Est.: Estimated
PermaWhite Interior Satin MSDS (3-20-07) Page 3 of 6 pages.
Section 7 Handling and Storage
Handling: Avoid contact with eyes, skin, and clothing.
Storage: Keep from freezing. Keep container closed when not in use.
Section 8 Exposure Controls / Personal Protection
Engineering Controls: If exposure conditions warrant, use mechanical local exhaust
ventilation or general dilution ventilation to reduce vapor concentrations.
Personal Protective Equipment (PPE):
Eye Protection: Wear safety glasses or face shield to prevent eye and face contact.
Skin Protection: Wear gloves to prevent prolonged skin contact.
Respiratory Protection: None required under normal, intended use conditions. If vapor
exposure causes discomfort and in areas of poor ventilation wear NIOSH approved respirator.
Protective Clothing: For brief contact, no special precautions other than clean body-covering
clothing should be needed. When prolonged or frequent repeated contact with the material could
occur, use protective clothing that is impervious to this material (such as tyvek).
General Hygiene Practices: Wash thoroughly after handling. Prevent Eye contact. Avoid
prolonged skin or inhalation contact.
Section 9 Physical Data
Appearance: White emulsion. Boiling Point: N/D (est. >200 ° F)
Odor: Slight ammonia like Freezing Point: N/D (est. 32 ° F)
.
Physical State: Liquid. pH: 9 - 10
Specific Gravity: 1.34 (water = 1). Viscosity: 1100 – 3000 cps
Soluble in Water: Yes
Section 10 Stability and Reactivity
Stability: Stable. Not reactive.
Hazardous Polymerization: Will not occur.