Use and Care Manual

TECHNICAL DATA
ZINSSER
®
READY PATCH™
Rust-Oleum Corporation Form: RAC-22
11 Hawthorn Parkway Phone: [phone] Rev: 030713
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL t
READY PATCH
Resin Type
Medium Oil Alkyd
Pigment Type
NA
Solvents
Aliphatic and Aromatic Hydrocarbons
Weight
Per Gallon
13.0 lbs.
Per Liter
1.56 kg
Solids
By Weight
66.6%
By Volume
47.0%
Volatile Organic Compounds
231 g/l
Recommended Dry Film
Thickness (DFT) Per Coat
NA
Wet Film to Achieve DFT
(unthinned material)
NA
Theoretical Coverage at
1 mil DFT (25µ)
753 sq.ft./gal.
Practical Coverage at Recommended
DFT (assumes 15% material loss)
13 square feet at 1/8 inch
Dry Times at 77°F
(25°C) and 50%
Relative Humidity
Touch
1 hour
Handle
2 hours
Dry Heat Resistance
NA
Shelf Life
4 years
Flash Point
>200°F (93°C)
Safety Information
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.