MSDS

N/A: Not Applicable N/D: Not Determined N/E: Not Established N/R: Not Required Est.: Estimated
Shieldz Clear MSDS (04-15-05) Page 3 of 6 pages.
Storage: Keep from freezing. Keep container closed when not in use.
Section 8 Exposure Controls / Personal Protection
Engineering Controls: If exposure conditions warrant, use mechanical local exhaust
ventilation or general dilution ventilation to reduce vapor concentrations.
Personal Protective Equipment (PPE):
Eye Protection: Wear safety glasses, goggles or face shield to prevent eye and face
contact.
Skin Protection: Wear gloves to prevent prolonged skin contact.
Respiratory Protection: None required under normal, intended use conditions. If vapor
concentrations exceed permissible exposure limits or in areas of poor ventilation wear NIOSH
approved respirator.
Protective Clothing: For brief contact, no special precautions other than clean body-covering
clothing should be needed. When prolonged or frequent repeated contact with the material could
occur, use protective clothing that is impervious to this material (such as tyvek).
General Hygiene Practices: Wash thoroughly after handling. Prevent Eye contact. Avoid
prolonged inhalation and skin contact.
Section 9 Physical Data
Appearance: White flowable liquid. Odor: Mild, sweet acrylic odor.
Physical State: Liquid pH: 7.5 to 8.5
Boiling Point: Above 200° F. Melting Point: Below 32° F.
Odor Threshold: N/D Viscosity: 2,000 – 4,000 cps
Solubility in Water: Dilutable in water. Specific Gravity (water = 1): 1.08
Section 10 Stability and Reactivity
Stability: This material is stable. Not reactive.
Hazardous Polymerization: Will not occur.
Hazardous Decomposition Products: None known.