Instruction Manual

Components

Prior to installing the kit, remove your mattress, bedding, and any

other objects from the top of the platform.

MESB-1

(Twin Size)

Above the side leg, loosen and remove the existing bolt using the Allen

wrench .Insert the bolt into a washer and use the Allen wrench

to tighten it through the same hole above the side leg. Repeat this step

3 more times for each side leg.

x8pcs

Beginning at one corner, use the Allen wrench to unscrew the 2

bolts connected to the corner. Use the open wrench to

simultaneously hold the connected nut on the underside of the frame

in place as you unscrew the bolt.

x4pcs

x1pc

Place one corner bracket on top of the corner of the frame, and a

second corner bracket on the bottom of the corner. Secure the brackets

in place using the existing 2 bolts and the Allen wrench to tighten

them. Use the open wrench to hold the 2 nuts in place on the bottom

of the bolts as you tighten them. Repeat steps 2 and 3 three more times

on the remaining bed corners.

Zinus SmartBase®

Euro Slats Mattress Foundation

PAGE 1
Zinus SmartBase® Euro Slats Mattress Foundation MESB-1 (Twin Size) 1 Prior to installing the kit, remove your mattress, bedding, and any other objects from the top of the platform. 3 Place one corner bracket A on top of the corner of the frame, and a second corner bracket on the bottom of the corner. Secure the brackets in place using the existing 2 bolts and the Allen wrench C to tighten them. Use the open wrench D to hold the 2 nuts in place on the bottom of the bolts as you tighten them.