User's Manual

Zinwave 2700 DAS – User Manual
Issue 1.2
April 2007
© Zinwave Ltd. 2007
Table 3-1: Dimensions and weight of the 2700 HU.
Parameter Value Unit
Height 4.4 (1.8) cm (inch)
Width 44.5 (17.8) cm (inch)
Depth 27.0 (10.6) cm (inch)
Weight 3.5 kg
3.1.3 Connection panels and LED indicators
A drawing of the front view is shown in Figure 3-2. The front panel of the HU contains
o 8 SFP ports for the 2780 SFP modules
o Hub + System LED indicators for status information and alarms.
o SFP port LED indicators
Figure 3-2: Front View of the 2700 Hub Unit.
A drawing of the rear view is shown in Figure 3-3. The back panel of the HU contains
o 8 SMA-female RF connectors (4 × downlink / 4 × uplink)
o RJ45 Ethernet port
o RS232 Serial port (9 pin sub-D)
o Mains input connector
o Fuse drawer
o ON/OFF switch
o Reset switch
Figure 3-3: Rear View of the 2700 Hub Unit.
Following is a description of all interfaces and LED indicators of the 2700 HU.
Hub + System LED indicators
Hub Power LED indicates the power status of the HU
(see
Table 3-2)
Hub Fault LED indicates a fault in the HU (see Table 3-2)