User's Manual

Zinwave 2700 DAS – User Manual
Issue 1.2
April 2007
© Zinwave Ltd. 2007
3.4.3 Connection panels and LED indicators
A drawing of the front view of the 277X AU is shown Figure 3-22. The front panel of
the AU contains
o Optical I/O
o RJ45 connector for powering via Power-over-Ethernet (PoE, IEEE 802.3af)
o N-type (female) antenna connector
o 4 SMA (female) connectors for semi-rigid jumper cables
Figure 3-22: Front view of the 277X AU.
The 277X AU rear panel does not contain any interfaces
The 277X AU does not contain any LED indicators.
Following is a description of all interfaces of the 277X AU.
Optical and Electrical I/O ports
Duplex SC
connector
Optical port which connects to the fiber-
infrastructure.
RF port Duplex N-type (female ) connector
DL Jumpers
Connects the DL output of the integrated 2765
AU to the duplexer
UL Jumpers Connects the UL input of the integrated 2
765
AU to the duplexer
Powering
PoE Connector RJ45 connector for powering via PoE
Antenna Connector PoE Connector Optical Connector
Jumper cables