User's Manual

33
Ch 4 Enhance PLC performance during
installation
This Powerline device sends data to remote device using WLAN or PLC technology. When it
sends data to another remote Powerline device over the existing electrical wiring in your
home, it may be affected by noises on the electric wire or the length of the wiring between
transmitting and receiving devices. Keep the following in mind when placing this Powerline
device at home.
AC outlets connection
Avoid connecting this device to an uninterruptible power supply (UPS) or backup power
supply device. For best results, we recommend connecting the adaptors directly to a wall
outlet. Avoid connecting high power-consumption appliances to the same wall outlet. Plug
these power consuming devices onto a noise filtering power strip to prevent these device
interfere with this Powerline device. See the following illustration figure:
For better performance, the following connection is recommended, although not isolate with
Noise filter power strip will still work OK.