User's Manual

each client in your wireless network.

 Authentication Type: Open, Shared and Auto. When choose “Open” or “Shared”,

all of the clients must select the same authentication to associate this AP. If

select “WEP Auto”, the clients don’t have to use the same “Open” or “Shared”

authentication. They can choose any one to authenticate.

 Default Key ID: Select whether the Key ID as the default Key.

 Key 1/2/3/4: Select “ASCII” or “Hex” and then type the key in the text field.

 64-bit WEP Encryption：64-bit WEP keys are as same as the encryption

method of 40-bit WEP. When input 10 hexadecimal digits (0-9, a-f or A-F) or

5 ACSII chars as the key, it is using 64-bit WEP encryption.

 128-bit WEP Encryption：128-bit WEP keys are as same as the encryption

method of 104-bit WEP. When input 26 hexadecimal digits (0-9, a-f or A-F)

or 10 ACSII chars, it is using 128-bit WEP encryption.

WPA Authentication Mode

This device supports six WPA modes including WPA-PSK (Pre-Shared Key), WPA,

WPA2-PSK, WPA2 and additional WPA/WPA2 PSK and WPA/WPA2 mixed mode.

For individual and residential user, it is recommended to select WPA-PSK or

WPA2-PSK to encrypt the link without additional RADIUS server. This mode requires

only an access point and client station that supports WPA-PSK. For WPA/WPA2,

authentication is achieved via WPA RADIUS Server. You need a RADIUS or other

authentication server on the network.

 WPA/WPA2-PSK:

 Pass Phrase:

Option: Pass Phrase (8-32bytes). This mode requires only an access point

and client station that supports WPA-PSK. The WPA-PSK settings include

Key Format, Length and Value. They must be as same as each wireless client

in your wireless network. When Key format is Passphrase, the key value

should have 8-63 ACSII chars.

 Key Renewal Interval:

The WPA Algorithm will regroup the key for a period. The default value is

3600 seconds and you can adjust the time interval.

 WPA/WPA2:

When selecting WPA/WPA2, you have to add user accounts and the target device

to the RADIUS Server. In the device, you need to specify the Server Network,

Server address, Server Port and Server Key of the target RADIUS server.

 WPA Algorithms: TKIP, AES, TKIP/AES. Select the encryption type.