User's Manual

22
WPS
This function helps to establish the Wi-Fi security. For AP mode, it can be setup one WPS
method including PIN (Personal Identification Number) and PBC (Push Button
Certification).
To begin the WPS progress, the WLAN security must be setup first. Please setup one
among WPAPSK, WPA2PSK, WPA/WPA2PSK and then apply WPS setting.
PIN: query the PIN code in the utility of WLAN client, and then enter it in the PIN field. The
Wi-Fi link between the WLAN client and the device should be encrypted.
PBC: Select PBC, and then you can begin the PBC process. Press the PBC button in the
front panel can also trigger this process. Press or click the PBC button on the WLAN client
to finish the communication. You can press the PBC button on the WLAN client first and
then click the PBC button on this device to establish the encryption.
The options and the information fields are showed below.
WPS Config
Item
Description
WMM Capable
Select to enable this function.
WPS Summary
Item
Description
WPS Current Status
It shows the current status of the WPS process.
WPS Configured
It indicated whether the WPS is configured.
WPS SSID
It is the first SSID of the device.
WPS Auth Mode
It indicates the authenticate mode of this device. It can be
configured in the wireless security page.
WPS Encryp Type
It indicates the encryption method of this device. Like WPS
authentication mode, it can be configured in the wireless
security page.
AP PIN
It shows the current PIN number of this device.
Reset OOB button
Press this button to reset the WPS of this device. The AP
PIN number will be changed.
WPS Progress
Item
Description