User's Manual

30
Mixed mode: In this mode the device transmits the packets
with preamble compatible legacy (802.11g), so they can be
decoded by legacy devices. The device receives and
decodes both Mixed Mode packets and legacy packets.
Green Field mode: the device transmits HT packets
without legacy compatible part. But the device receives and
decodes both Green Field and legacy packets.
BW (Bandwidth) Choose “20” for the standard bandwidth or “Auto” to use
the 40MHz bandwidth automatically.
GI (Guard Interval) Choose “Long” to use long guard interval or “Auto” to setup
the GI automatically.
MCS (Modulation
Coding Scheme)
Choose MCS. Please refer to the section of Access Point.
QoS
QoS Configuration
Item
Description
WMM
Check the box to enable WMM function. It depends on the
associated AP, if it supports WMM and you can enable this
function on this device.
WMM Power Saving
Check the box to enable WMM function. It depends on the
associated AP, if it supports WMM and you can enable this
function on this device. When enabled, the options below
can be configured.
PS Mode
The options are “AC_BE”, “AC_BK”, “AC_VI” and
“AC_VO”. Please select the respective options according to
the AP.
11n Configurations
11n Configuration
Item
Description
MPDU Aggregation
Check the box to enable this function. Click on “Manual”
radio button to setup the MPDU or “Auto” to setup
automatically.
MPDU density
Select the MPDU density.
Aggregation MSDU
(A-MSDU)
The multiple HT packets can be transmitted with single
ACK reply packet. Enable it to apply this function and
reduce the network congestion.