User's Manual

and do not power off the device during this period.

Save/Reload Settings

In this page, you can export the setting, import the setting or load the factory default.

Export Settings:

To export the settings, click “Export” button to open or save the configuration. In the pop

up window, click “Open” to open the configuration. You can read the configuration in the

next page. Click “Save” to save the configuration file. The file extension is “.dat”.

Import Settings:

To import the settings, click “Browse” to browse the file, and then click “Import” to import

the setting file.

Load Factory Defaults:

Click “Load Default” button to reset the device to factory default. All users’ settings will be

cleared.

System Command

The linux command can be input in this field. It is recommended to not to use this

function unless the experts.

System Log

The system log shows in this window. For technical support, you may need to copy and

save the log to text file and send it to the technical service. Click “Refresh” button to

refresh the page or “Clear” button to clear the log.