User's Manual

60
The following table describes the priorities that you can apply to bandwidth.
Priority Level Description
High Typically used for voice or video applications that is
especially sensitive to the variations in delay.
Medium Typically used for important traffic that can tolerate
some delay.
Low Typically used for non-critical traffic such as a large
number of transfers but that should not affect other
application.
Click the QoS link under Management to open the QoS Setting page. This page is
divided into three parts: basic settings, QoS rule settings, and current QoS setting
table.
1. Enable QoS and enter Max Throughput (default 20Mbps) 、
Bandwidth Ratio (default H:50%, M:30%, L:20%)
The following table describes the labels in this part.
Label Description
QoS Enabled Select this check box to enable quality of service.