User's Manual

SNMP Agent

This device is compatible with SNMP v1/v2c and provides standard MIB II.

Currently only the “public” community string is available and the modified

settings by SNMP SET request will be lost after rebooting the device.

1. Enable SNMP and then enter IP Address of SNMP Manager in Trap

Receiver IP Address field and Community String in System Community

String field. Final click Apply Changes button.

2. Following Table describes the SNMP configuration parameter

Label Description

System Community String

This is password sent with each trap to the

SNMP Manager.

System Name Type the Name which is name of device.

System Location Type the Location which is location of

device

System Contact Type the Name which is person or group

when the device has problem can find

they.

Trap Receiver IP Address Type the IP Address which is address of

SNMP Manager.

Trap Receiver Community

String

This is password receive with trap from

the device (SNMP Agent).