User's Manual

76
1. Change Password
You can change password for this tool. Fill the new password in the New
Password field, and the n click on Change Password button.
2. Discover
After press this button, you could see there are how many devices in your network.
And you would see the basic information about these devices, such as:
Ÿ SSID
Ÿ IP Address
Ÿ Subnet Mask
Ÿ Operation Mode
Ÿ Channel number
Ÿ MAC Address
Ÿ Active Client: this field shows how many clients associated with the device
Ÿ RSSI: this field shows Received Signal Strength Indication while device is
on AP-Client mode
3. Setup IP
After you press the Setup IP button, you would see Setup IP Addre ss window.
You could change device’s IP Address, Netmask, and Default Gateway in this
window. But if the device’s web server needs User Name and Password to login,
you should fill in these two fields and then apply changes.
‚ ƒ „ … † ‡ ˆ
•