User's Manual

RTS Threshold

The RTS threshold determines the packet size at which the radio issues a

request to send (RTS) before sending the packet. A low RTS Threshold setting

can be useful in areas where many client devices are associating with the

device, or in areas where the clients are far apart and can detect only the

device and not each other. You can enter a setting ranging from 0 to 2347

bytes.

Beacon Interval

The beacon interval is the amount of time between access point beacons in

mini-seconds. The default beacon interval is 100.

ACK Timing

Acknowledgement Character Timing, is the amount of time that device wait

client’s response. If the device does not receive the response from client after

the time interval, it will resend the data and wait client’s response. The default

ACK timing is 91*4us. You may need to change this value due to the

environment or distance. Bad environment or long distance needs more time

to wait client’s response.

Client Expired Time

The client expired time determines time interval the client need to re-associate

with the device while client is idle. The default client expired time is 300 sec.

MTU Size

Maximum Transmission Unit, the default MTU size is 1500. You may need to

change the MTU for optimal performance of your wireless LAN traffic.

Data Rate

The standard IEEE 802.11b/11g supports 1, 2, 5.5, 11 / 6, 9, 12, 18, 24, 36, 48

and 54 Mbps data rates. You can choose the rate that the device uses for data

transmission. The default value is “auto”. The device will use the highest

possible selected transmission rate.

Broadcast SSID

Broadcasting the SSID will let your wireless clients find the device

automatically. If you are building a public Wireless Network, disable this

function can provide better security. Every wireless stations located within the

coverage of the device must connect this device by manually configure the

SSID in your client settings.

IAPP

This function will let Wireless Stations roam among a network environment

with multiple devices. Wireless Stations are able to switch from one device to

another as they move between the coverage areas. Users can have more

wireless working range. An example is as the following figure.