User's Manual

QoS (Quality of Service)

Filter Priority and IP-ToS have not finished yet and also fine tuning.

QoS allows you to specify some rules, to ensure the quality of service in your network.

Such as use Bandwidth Priority concept to allocate bandwidth. This function can be

helpful in shaping and queuing traffic from LAN (WLAN) to WAN or LAN to

WLAN, but not WLAN to WLAN.

Enable the QoS and then fill in Bandwidth Ratio (H/M/L) the device has three

Bandwidth Priorities High, Medium and Low user can allocation Bandwidth to these

and default is High:50％, Medium:30％ and Low:20％.