User's Manual

each wireless client in your wireless network. When Key format is Passphrase, the key

value should have 8~63 ACSII chars. When Key format is Hex, the key value should have

64 hexadecimal digits (0~9, a~f or A~F).

Connecting Profile

To enable this function, this device must be in the client mode. User clicks to enable

this function and input the SSID of preferred AP and then click “Apply Changes”. The

BSSID field is an option in case of two preferred APs having the same SSID. In this

case, this device will check both SSID and BSSID and connect to the matching AP. We

can leave it empty in the normal case.

After enabling the connecting profile, the system will check the preferred SSID in a

fixed period. If preferred APs are found, the radio will try to connect with them one by

one from top to down of the list and regardless of the signal quality and strength. The

users can put their most favorite AP on the top so it will be connected first. Please note

that check the preferred APs will impact the throughput a lot! Unless the signal strength

is good enough, otherwise don't set the interval too short. The default value is 10

minutes. And currently, all the profiles share the same security setting.

To delete one SSID in the list, users click the square to select it and click “Delete

Selected” and then click “OK” in the pop-up window to confirm it. The user can delete