User's Manual

6
● Wireless IA AP unit * 1
● Mounting Kit * 1
● Power Over Ethernet Kit * 1
● Ground Wire * 1
● 2.5” U bolts * 2
● Waterproof Connector * 1
Hardware Installation
Once you check off everything from the package, you can start to install the IA. You can
mount to a pipe. The steps are showed in the following：
1. You must mount the IA into the bracket first.
2. You can use the 2.5 inches U bolt to mount on the pipe. The two U bolts must be mounted
tightly. Be aware of not over-tighten the U bolt.