User Manual

14
to other servers on the Internet until the specified web site is
found.
MAC Clone:
Clone device MAC address to the specify MAC address required
by your ISP.
Fill my MAC button: You can manually input the MAC Address
for MAC clone, or click the button to input the MAC Address of
the PC which you are using it to configure the device.
DHCP Client (Dynamic IP)
All IP configuration data besides DNS will obtain from the DHCP server when
DHCP-Client WAN Access Type is selected.
Item Description
Host Name:
Input the host name for the device. This value is
optional and not required for the general case.
MAC Clone:
Clone device MAC address to the specify MAC
address required by your ISP
PPPoE
When the PPPoE (Point to Point Protocol over Ethernet) WAN Access Type is selected,
you must fill the fields of User Name, Password provided by your ISP. The IP
configuration will be done when the device successfully authenticates with your ISP.
Item
Description
User Name:
The account provided by your ISP.
Password/
Verify
Password:
The password for your account. It is required to input again to verify.
Operation
Mode:
The available options are: “Keep Alive”, “On Demand”, and
“Manual”. If your ISP charges you with a standard monthly fee, you
can select “Keep Alive” to keep a continue connection. If your ISP
charges you by a minute usage plan, you can select the “On
Demand” or “Manual” for the connection if necessary. When the
WAN network is idle in “On Demand” mode, the WAN will
disconnect. You can also setup the idle time for On Demand mode.