User Manual

15
For the “Manual” mode, you can click “Connect” in the status page
to connect the WAN and then click “Disconnect” to disconnect.
Redial Period
When selecting the “Keep Alive” mode, the redial time can be set in
this field. It will redial the connection to keep it online. The default
value is 60 seconds.
On demand
idle time
When selecting the “On Demand” mode, the idle time can be set in
this field. If the network is idle more than this time, the WAN will
disconnect.
MAC Clone
Clone device MAC address to the specify MAC address required by
your ISP.
PPTP / L2TP:
The device can connect L2TP (Layer 2 Tunneling Protocol) or PPTP (Point to Point
Tunneling Protocol) through WAN interface. In this mode, the hosts in the LAN or
WLAN go through the PPTP/L2TP without extra settings; this device will do
PPTP/L2TP for them.
Item
Description
User Name:
This is the account provided by your ISP.
Password:
This is the password for your account.
Address Mode:
The available options are “Dynamic”, “Static”. Select
“Dynamic” to obtain the IP Address from the server or select
“Static” to manually setup.
IP Address:
It is only available only if selecting “Dynamic” for the Address
mode. Please obtain the legal IP Address from server and
setup in this field manually.
Subnet Mask:
It is only available only if selecting “Dynamic” for the Address
mode. Please obtain the subnet mask from server and setup
in this field manually.
Default Gateway
It is only available only if selecting “Dynamic” for the Address
mode. Please obtain the legal gateway address from server
and setup in this field manually.
MAC Clone
Clone device MAC address to the specify MAC address
required by your ISP.