User Manual

17
Address via LAN/WLAN, and you can change it if you want to.
Subnet Mask
This is the subnet mask for the LAN. The default value is
“255.255.255.0”.
LAN2
The secondary LAN can be enabled for the special
application such as dynamic routing with another domain of
network.
LAN2 IP Address
This is the IP Address for the secondary LAN interface.
LAN2 Subnet Mask
This is the subnet mask for the secondary LAN.
MAC Address
The MAC Address of LAN is showed in this field.
DHCP Type
You can select to enable DHCP server. When enabling the
DHCP server, you must setup the information below.
Start IP Address
This is the first IP Address of the IP pool which the server
assigns the IP Address from.
End IP Address
This is the last IP Address of the IP pool.
Subnet mask
This is the subnet mask of this domain. The default value is
“255.255.255.0”.
Primary DNS
Server
This is the primary DNS server for the LAN PCs.
Secondary DNS
Server
This is the second DNS server for the LAN PCs.
Default Gateway
This is the default gateway for the LAN PCs.
Lease Time
This is the DHCP lease time. When it is short, the IP
release/renew of the LAN will be faster but the network
congestion will be more.
Statically
Assigned
You can manually assign the IP Address to the certain PCs.
Enter the MAC Address and IP Address in the table.
802.1d Spanning
Tree:
Enable this function to prevent the broadcast storm in the
LAN.
LLTD
Enable this function to support LLTD (Link Layer Topology
Discovery) for Windows Vista. It shows the status of
connection in the Windows Vista.
IGMP Proxy
Enable this option to provide the relay of Multicast.
UPNP
Enable this option to active the function. The UPNP
application such as MSN messenger detects and setup
through UPNP.
Router
Advertisement
Enable this option to send the Router discovery message
periodically in the multicast network.
PPPoE Relay
Enable this function to relay the PPPoE connection from LAN
to WAN. When this option is enabled, the PC in the LAN can
establish PPPoE to the server through WAN.